Project Topics and Materials - Page 1,505

ABSTRACT This research work on the water drainage problems (A case study of IMT campus 3 Enugu), the scope of this research work covers every activity which has to do with the drainage problems, background to the subject matter, rational for the study and the limitations of the... Continue Reading

TABLE OF CONTENTS CHAPTER ONE 1.0 Introduction 1.1 Definition of a panel door 1.2 Classification of a door 1.3 Objectives of the project 1.4 Significance of the project CHAPTER TWO 2.0 Timber 2.1 Definition of timber 2.2 Growth of timber 2.3 Types of timber 2.4 Conversion of timber 2.5 Methods of conversion... Continue Reading

ABSTRACT The use of microcontroller is in every field even we can use it in the design and fabrication of biomedical equipments. A little example is here. The microcontroller at89s51 (8051) is here used to develop a heart beat monitoring system. By placing your finger... Continue Reading

PREFACE This project is mainly concerned with the presentation of information basically on the structural detailing of reinforced concrete members of a story building, in a sloppy land with a retaining wall. Structural detailing is a branch of structural work that... Continue Reading

ABSTRACT In the sense that the materials involved in this project were capital intensive more especially cement, so in carrying out the work one must have to be careful in the selection and collection of materials to be used in the casting of the concrete. The materials used are coarse aggregate... Continue Reading

RECLAMATION MEASURES FOR GULLY EROSION SITES A CASE STUDY OF OBOLLO-ETITI, UDENU LOCAL GOVERNMENT AREA, ENUGU STATE Abstract The incidence of gully erosion in Obollo-Etiti in Udenu Local Government Area of Enugu State has assumed alarming proportions thereby gaining local government recongnition as an ecological disaster. The aim of this study is... Continue Reading

EVALUATION OF THE EFFECTS OF ANTHROPOENIC ACTIVITIES AND DOMESTIC WASTE ON SURFACE WATER QUALITY (A CASE STUDY OF EKULU RIVER, ENUGU). Abstract The microbiological and organic pollutants characteristics of umuosoko stream in ikwuano local government area, Enugu state, Nigeria were carried out. Twenty water samples were collected from four... Continue Reading

EVALUATION OF THE EFFECTS OF FLOODING ON THREE VARIETIES OF RICE (A CASE STUDY OF ABAKALIKI, EBONYI STATE) Abstract Flooding has been described as one of the most important environmental factors determining the distribution of salt marsh plants. We studied the impact of five water levels on the germination and establishment of the invasive... Continue Reading

ABSTRACT The purpose of the project is to study the effect of liquid flow rate and gas flow rate on the pressure drop in a packed absorption tower and also to repair and restore the packed absorption tower to good working condition. Trouble shooting... Continue Reading

ABSTRACT The production of the soap was carried out using all the necessary equipments like the reactor, mould, stirrer, hygrometer guage etc. and all the required reagents for soap production in correct proportion. In the production, palm kernel oil (P.K.O) was used instead of tallow or grease. This was... Continue Reading

ABSTRACT This project (Construction Of A Simple Size Reduction Machine) It was constructed locally with the use of local materials and tools in I.M.T mechanical Engineering workshop. The various parts of the equipment were constructed separately using mild steel before finally coupled. During the... Continue Reading

ABSTRACT The candle mould has twenty four (24) holes which could produce twenty four (24) quality candle sticks Aluminum, a non ferrous metal was used as the construction material for the mould the type of casting technique used was green sand mould method. In the process of moulding the... Continue Reading

ABSTRACT This project “production of plane mirror using local raw material” is meant to study the possibility of producing plane mirror using sand rich in silica as its major local raw material. Plane mirror is produced by casting one side of a sheet glass. Presently in Nigeria, sheet glass... Continue Reading

ABSTRACT This project was carried out to ascertain whether the local palm oil met the required standard. The analytical test carried out include the free fatty acid test the acid value, iodine value moisture, content, saponfication value, peroxide value, specific gravity, colour and viscosity. The specific gravity of the... Continue Reading

ABSTRACT This project was carried using activated local form local corporation Enugu, and the rate of bleaching of palm oil using spectrophotometer by measuring the absorbance. It was also performed to check the suitability of local as a bleaching agent for palm oil. The local from local corporation... Continue Reading

ABSTRACT The production of cassava flour by the method of traditional processing method (sun drying) and modern processing method (oven drying) was carried out using cassava sliced cubes or peeled cassava. Indeed, the traditional Nigeria techniques of... Continue Reading

ABSTRACT This project work, characterization of some branded motor oil was aimed at studying and analyzing the characteristics/properties of lubricating oils of various brands it also exphered the origin, properties, refining and exploration techniques of crude oil to produce variety of products such as... Continue Reading

ABSTRACT This study has its theme as a utilization studies of Enugu coals with the view of studying its properties, classification, preparation storage etc comparing coals obtained from different locations. The Enugu coal is a sub-bitummous and non coking coal. It is very rich in waxes and resins, thus it may be... Continue Reading

ABSTRACT The design and construction of s refrigerating unit is handled from the knowledge of the working principles of laws of thermodynamics. The size of the containing vessel i.e the case as established to be of 45cm by 32 cm in dimension. The Angle iron mild steel to used in the fabrication and... Continue Reading

PRODUCTION OF SURFACE ACTIVE AGENTS (LAUNDRY SOAP) IN CHEMISTRY LABORATORY ABSTRACT In this project work, the researcher analysed the properties of surface-active agents (laundry soap) to be an excellent cleanser because of its ability to remove stains from surfaces. The researcher work was based mainly on internet print out, textbooks and... Continue Reading

INVESTIGATION OF THE PRODUCTION OF GOOD QUALITY ETHANOL FROM LOCAL RAW MATERIAL (CASSAVA) USING MICRO ORGANISM WITHIN OUR LOCALITY ABSTRACT A literature review of ethanol production from local materials especially from cassava is presented. The study was carried out to investigate the production of a good quality ethanol from cassava using... Continue Reading

ABSTRACT In this project we review the work of some authors on differential calculus. Different types of functions and the method for finding their derivatives were also considered the application of differential calculus was death with to show the importance of this work. TABLE OF... Continue Reading

ABSTRACT Based on the fact that there has been a high rate of poor nutrition in Oredo local government area of Edo State, the study determine the causes and effect of the condition child under age... Continue Reading

ABSTRACT The estimation of vitamin C in Tangerine Juice was investigated, the results obtained using titrimetric method shows that one tangerine fruit juice contains approximately 10mg of vitamin C content, and the 19 fruits sample used in the experiment contains about 190mg of... Continue Reading

ABSTRACT The estimation of vitamin C in Tangerine Juice was investigated, the results obtained using titrimetric method shows that one tangerine fruit juice contains approximately 10mg of vitamin C content, and the 19 fruits sample used in the experiment contains about 190mg of... Continue Reading