+234 813 0686 500
+234 809 3423 853
[email protected]

PLANT DESIGN OF HIGH FRUCTOSE CORN SYRUP

(Chemical Engineering Project Topics & Materials)

Type: Project
Department: Chemical Engineering
Project ID: CNG0272
Access Fee: ₦5,000 ($14)
Pages: 86 Pages
Format: Microsoft Word
Views: 1.4K
Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

This project envisages the establishment of a plant for the production of high fructose corn syrup with a capacity of 6,000 tons per annum.

The country`s requirement of corn syrup is met through import. The present (2013) demand for syrup is estimated at 5,000 tons. The demand for the product is projected to reach 8,858 tones and 14,266 tons by the year 2018 and year 2023, respectively.

The principal raw materials required are starch, alpha-amylase, gluco-amaylase, and glucose isomerase. Starch is locally obtained from corn while the other raw materials have to be imported. Corn is leading source of starch both for food and for its use in industries and composed of approximately: 72% Starch, 6%Gluten, 10%Fiber and 12%Germ.

PLANT DESIGN OF HIGH FRUCTOSE CORN SYRUP

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Type: Project
Department: Chemical Engineering
Project ID: CNG0272
Access Fee: ₦5,000 ($14)
Pages: 86 Pages
Format: Microsoft Word
Views: 1.4K

Payment Instruction

Bank payment for Nigerians, Make a payment of ₦ 5,000 to

Bank	GTBANK
Account Name	Obiaks Business Venture
Account Number	0211074565

Bitcoin: Make a payment of 0.0005 to

Bitcoin(Btc)


Copy to clipboard Copy text

CHAPTER ONE INTRODUCTION The project is a pre-requisite for the award of Higher National Diploma (HND) in Mechanical Engineering. The project “Design and fabrication a corn shelling machine” is indeed an essential one in a time like this when almost al human endeavour is embracing technology for... Continue Reading

Type:Project
ID:MCE0040
Department:Mechanical Engineering
Pages:54

2. THE DESIGN AND FABRICATION OF A CORN SHELLING MACHINE

ABSTRACT This Machine is design and fabricate as a prerequisite for the award of a Higher National Diploma. We sketch different designs which after consideration of many factors like the machine efficiency, the cost of materials e.t.c before we finally embark on this machine. The machine major component are the shaft, the inner barrel, the outer... Continue Reading

Type:Project
ID:MCE0355
Department:Mechanical Engineering
Pages:51

3. DESIGN AND FABRICATION OF CORN SHELLING MACHINE

ABSTRACT A machine for corn shelling is highly and greatly needed to consistency of usage of corn in local and international levels. With regards to this indispensable needs, a corn shelling machine is designed which operates to remove the corn grains and leaving the cobs intact.... Continue Reading

Type:Project
ID:MCE0098
Department:Mechanical Engineering
Pages:65

4. DESIGN AND FABRICATION A CORN SHELLING MACHINE

Type:Project
ID:MCE0105
Department:Mechanical Engineering
Pages:65

5. DESIGN AND FABRICATION OF CORN SHELLING MACHINE

Type:Project
ID:MCE0022
Department:Mechanical Engineering
Pages:60

6. DESIGN AND FABRICATION OF MAIZE CORN ON COB TRAY DRYER

ABSTRACT This study was carried out to generate a design data, design and fabricate a maize corn-on-cob tray dryer used by maize farmers. Ripped maize corns with husks were bought from the market and preserved to retained its moisture content, dehusked and thereafter, dried to a given percentage moisture content of 15%. This was done by laboratory... Continue Reading

Type:Project
ID:CNG0150
Department:Chemical Engineering
Pages:65

7. As-Built Surveying for the Facility Retrofitting of an Offshore Gas Plant using Leica Scanstation 2 High Definition Surveying Instrument

ABSTRACT 3D as-built models have been utilized over the years as an aid to several engineering activities and there are conventional survey methods; e.g. Total Station ray method, photogrammetric technique etc., with which the data required for these models are generated. These methods have proven not to be optimal in capturing datasets required... Continue Reading

Type:Project
ID:QUS0088
Department:Quantity Surveying
Pages:143

8. Quality evaluation of zobo concentrate sweetened with inverted sugar syrup and sodium cyclamate.

Abstract In this study, triple strength Zobo concentrate (ZC) was prepared using purple calyx of Sorrel by Hurdle Technology; and asepti- cally packaged in ambered coloured containers for spray drying. The prepared samples of ZC were sweetened with inverted sugar syrup (coded 617) and sodium cyclamate (coded 615) were subjected to sensory,... Continue Reading

Type:Project
ID:FTE0162
Department:Food Technology
Pages:15

9. Design of a Biogas Plant

Note: This work contains only the schematic diagram/design of a biogas plant Biogas typically refers to a mixture of gases produced by the breakdown of organic matter in the absence of oxygen. Biogas can be produced from regionally available raw materials such as recycled waste. It is a renewable energy source and in many cases exerts a very... Continue Reading

Type:Project
ID:CNG0465
Department:Chemical Engineering
Pages:1

10. Design of a Biogas Plant

Note:This work contains only the schematic diagram/design of a biogas plant Biogas typically refers to a mixture of gases produced by the breakdown of organic matter in the absence of oxygen. Biogas can be produced from regionally available raw materials such as recycled waste. It is a renewable energy source and in many cases exerts a very small... Continue Reading