CONSTRUCTION OF METAL SHARPENING AND DULLING DEVICE

  • Type: Project
  • Department: Chemical Engineering
  • Project ID: CNG0439
  • Access Fee: ₦5,000 ($14)
  • Pages: 41 Pages
  • Format: Microsoft Word
  • Views: 595
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853


ABSTRACT
As  a result of modern development in Science and
Technology, most of the large scale industrial used machine were now
modernized to simple small and efficient machines. Some of these
machines were either operated manually or the aid of electricity.
   
For this reason, big metal sharpening machine was here reduced to
simple term, which can be operated manually such as file and grinding
machine for production firms and homes.  This machine performs the same
functions as the large industrial metal sharpening and dulling device
which was reduced, but requires straight and also consumes time. 
The
simple metal sharpening and dulling device was constructed with a metal
steel which is an old engineering materials.  The following properties
were put into consideration such as long lasting of the metal, its
resistance to stresses and the preservation treatment of the metal steel
since the efficiency of the machine depends on the strength of the
metal steel and the grinding stone.



TABLE OF CONTENT
Title Page                                        ii
Letter of Transmittal                            iii
Approval Page                                     iv
Dedication                                    v
Acknowledgement                                vi
Table of Contents                                vii
Abstract                                        vi
   
CHAPTER ONE
1.0    INTRODUCTION                            2
1.1    Background of the Study                         1
1.2    Statement of the Problem                    2
1.3    Aims/Objectives of the Study                     3
1.5    Scope and Limitation of the study                  4


CHAPTER TWO
2.0    Literature Review                             7
2.1    Historical Background                         7
2.2    Types of Metal Sharpening and Dulling            9
2.3    Dulling Device                                16
2.4    Blade                                    17
2.5    Materials used in Making Blade                 21
2.6    Mechanism / Principles of Sharpen and Dulling    22
CHAPTER THREE
3.1    Construction of a Metal Sharpening             23
CHAPTER FOUR
4.1    Result/ Analysis                             27
CHAPTER FIVE
5.1    Discussion                                30
5.2    Conclusion                                 32
5.3    Recommendation                             35






CONSTRUCTION OF METAL SHARPENING AND DULLING DEVICE
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Chemical Engineering
  • Project ID: CNG0439
  • Access Fee: ₦5,000 ($14)
  • Pages: 41 Pages
  • Format: Microsoft Word
  • Views: 595
Payment Instruction
Bank payment for Nigerians, Make a payment of ₦ 5,000 to

Bank GTBANK
gtbank
Account Name Obiaks Business Venture
Account Number 0211074565

Bitcoin: Make a payment of 0.0005 to

Bitcoin(Btc)

btc wallet
Copy to clipboard Copy text

500
Leave a comment...

    Details

    Type Project
    Department Chemical Engineering
    Project ID CNG0439
    Fee ₦5,000 ($14)
    No of Pages 41 Pages
    Format Microsoft Word

    Related Works

    CONSTRUCTION OF METAL SHARPENING AND DULLING DEVICE ABSTRACT As a result of modern development in Science and Technology, most of the large scale industrial used machine were now modernized to simple small and efficient machines. Some of these machines were either operated manually or the aid of electricity. For this reason, big metal sharpening... Continue Reading
    CONSTRUCTION OF METAL SHARPENING AND DULLING DEVICE ABSTRACT As a result of modern development in Science and Technology, most of the large scale industrial used machine were now modernized to simple small and efficient machines. Some of these machines were either operated manually or the aid of electricity. For this reason, big metal sharpening... Continue Reading
    ABSTRACT Hearing aid device is a small electronic gadget that is fit in or behind the ear to improve one’s hearing and consequently communication ability.This research work involves the design and development of a hearing aid device withpre-amplifier; an acoustic signal picked-up using a condenser microphone. TDA 2822M IC is configured to... Continue Reading
    ABSTRACT The aim of the project is to construct a soap cutting device capable of size-remaining the soap produced into regular bars and tablets without error in shapes and sizes. Soap cutting devices are used to size reduce or cut the bulk of soap produced into bars and tablets.  Soap cutting devices facilitate the process of cutting the produced... Continue Reading
    ABSTRACT The aim of the project is to construct a soap cutting device capable of size-remaining the soap produced into regular bars and tablets without error in shapes and sizes. Soap cutting devices are used to size reduce or cut the bulk of soap produced into bars and tablets. Soap cutting devices facilitate... Continue Reading
    ABSTRACT In this construction of metal shelf, mild steel was chosen due to its inherit duties. The undismountable metal shelf, which has four compartments and four partition was constructed under the following processes. This  includes drawing and dimensioning of the proposal metal. Metal shelf, market surveying and procurement of the needed... Continue Reading
    ABSTRACT In this construction of metal shelf, mild steel was chosen due to its inherit duties. The undismountable metal shelf, which has four compartments and four partition was constructed under the following processes. This includes drawing and dimensioning of the proposal metal. Metal shelf, market surveying and... Continue Reading
    ABSTRACT This project report is on the construction of a metal rack which can be put to use in laboratories, industries, shops, kitchens, and also for displaying various articles. The construction work was done in a mechanical work shop. Racks are of various types which concides with the numerous uses to which they are... Continue Reading
    ABSTRACT Metal detectors are electronics sensors that indicate the presence of metallic object without making physical contact with object. They are effective and useful security tools employed in strategic places such as airport, bank, stadiums, government houses and also in production industries to detect presence of metallic object on person... Continue Reading
    ABSTRACT Metal detectors are electronics sensors that indicate the presence of metallic object without making physical contact with object. They are effective and useful security tools employed in strategic places such as airport, bank, stadiums, government houses and also in production industries to detect presence of metallic object on person... Continue Reading
    Call Us
    whatsappWhatsApp Us