Chemical Engineering Project Topics and Materials (Page 18)

ABSTRACT The construction of this vertical fire tube boiler was carried out both at the industrial center and Mechanical Engineering workshop of the Institute of Management and Technology (IMT), Enugu.The boiler contains 2 steam tubes at triangular pitch which are enclosed in a shell. Water is introduced... Continue Reading

ABSTRACT The aim of this project was to construct a steel cupboard in order to help us acquire the knowledge of fabrication of a modern cupboard and the essence of it. Also to enable us (the students of chemical Engineering) to know how to construct as future engineers. The construction of steel cupboard was done... Continue Reading

ABSTRACT The construction of the callophane sealing machine was carried out. The project started with an encompassing review of the various methods of heat sealing film packages. The machine can be used in sealing both low, medium and high-density cellophane. The product has a heating element, which... Continue Reading

REPORT ON ABSTRACT A cupboard in its proper term. Is a well shaped structure, which could either be rectangular, square or oval in shape, used for the storage of valuables at homes, and offices. Reniff defined cupboard as a rectangular shaped structure of cabinet that accommodates, or is used to keep details for... Continue Reading

ABSTRACT A mould can generally be defined as a pattern constructed for the production of the same shape and size. The constructional material differs from one operation to another. When one considers the money at hand, he decides whether to start from the primary production level or secondary... Continue Reading

PRESENTATION ON THE CONSTRUCTION OF “5” LITER ELECTRIC KETTLE ABSTRACT The construction of the five (5) litre Electric Kettle was carried out in mechanical workshop of the Institute of Management and Technology Enugu. (I.M.T). The fabrication process, included measuring and marking out operations of which the following dimensions was taken;... Continue Reading

ABSTRACT This research work was arrived as the formulation and production of ethanol (ethyl alcohol) from the fermentation of palm wine. A fresh palm wine was ated which was obtained from Emene in Enugu State. The characteristics that was tested before and after fermentation were; specific... Continue Reading

ABSTRACT This project is an equipment which been fabricated for the principle purpose of producing heat energy for commercial use by burning solid fuel like briquette. The project which is the fabrication of briquette stove was made from preferentially selected engineering materials like mild steels of different... Continue Reading

ABSTRACT Interface on petroleum product in multi-purpose pipeline system refers to as the zone of demarcation between two products where mixing occurs. Generally, interface is a boundary layer, so the boundary between two products when they are pumped in... Continue Reading

ABSTRACT This project research work was based on dehydration of ethanol water solution using activated starch. The extracted starch obtained was of whistler method. The starch obtained from potato was weighed with the use of a weighing balance, 0.1gram of activated starch weighted for... Continue Reading

ABSTRACT This projects is aimed at knowing the process and quality factor in Laundary and Toilet Soap Projection. Various factors affected the quality of the soap produced. These include the method used in production, types and nature of oils used, the percentage of the additives... Continue Reading

REPORT ON ABSTRACT The construction of sieves system was carried out in the Engineering workshop, Institute of management and technology, Enugu. The aim of this project is to fabricate a sieve system, which is capable of separating solid particles of various sizes. The construction was carried out in order to... Continue Reading

REPORT ON FABRICATION OF FLOW NOZZLE ABSTRACT The flow nozzle was constructed based on the dimensions and specifications of the international standard organization (I.S.O) recommendation. Throat diameter 42.5mm Length converging nozzle 68mm Thickness of nozzle 2mm Diameter of major axis of ellipse 85mm Diameter of minor axis of ellipse 56.6mm... Continue Reading

CHAPTER ONE INTRODUCTION The word wax describes a large variety of substances of plant and animal origin, as well as man made products which are mostly petroleum derivatives. However, natural waxes are not single substances, but a mixture of various of long-chain fatty acids and a variety of other constituents,... Continue Reading

Abstract The purpose of the construction is aimed at producing heat energy for commercial use by turning liquid fuel(kerosene).the construction was successful by appropriate selection of engineering material favourably mild steel(blacksheet) and steel iron for special p2rts. The technological properties... Continue Reading

ABSTRACT Industrial mixer is equipment designed to carryout operation involved the combination of two or more substance to achieve a uniform product. The method of fabrication of this mixer involves a preliminary computation of the dimensions of the standard which they will be used in marketing out cutting, out to... Continue Reading

ABSTRACT The Turbine Mixer was Fabricated at the Mechanical Engineering Workshop of Institute of Management and Technology, Enugu. The method of the fabrication of the turbine mixer involved a preliminary computation of the dimensions of the standard turbine in relation to the dimension of the reacting vessel in which... Continue Reading

ABSTRACT Interface on petroleum product in multi-purpose pipeline system refers to as the zone of demarcation between two products where mixing occurs. Generally, interface is a boundary layer, so the boundary between two products when they are pumped in... Continue Reading

ABSTRACT This seminar studied and analyzed Water Pollution, the causes, the effects, the sources, types and control of Water Pollution in the societies water pollution occurred when pollutants were discharged directly or indirectly into water bodies without adequate treatment to remove harmful compounds, Water Pollution affected... Continue Reading

ABSTRACT A mould can generally be defined as a pattern constructed for the production of the same shape and size. The constructional material differs from one operation to another. When one considers the money at hand, he decides whether to start from the primary production level or secondary... Continue Reading

ABSTRACT The steel-shelf was constructed at the mechanical engineering workshop of the institute. It was done by first of all making out the dimension with the scribers, cutting, wielding, dittoing, assembling and painting. The method ology involved the preliminary calculation of the total surface area of the two mili... Continue Reading

CONSTRUCTION OF STEEL SHELF (BOOK SHELF) ABSTRACT The steel – shelf was constructed at the mechanical engineering workshop of the institute. It was done by first of all marking out the dimension with scribers, cutting, welding, filing, assembling and painting. The methodology involved the preliminary calculation of the total surface area of the... Continue Reading

ABSTRACT The project topic was constriction of steel cupboard which the primary aim was to enable students know how cupboard can be constructed using steel and the factors to be considered while choosing a particular material for construction. The construction was carried out by drawing and sketching of the steel... Continue Reading

ABSTRACT The Turbine Mixer was Fabricated at the Mechanical Engineering Workshop of Institute of Management and Technology, Enugu. The method of the fabrication of the turbine mixer involved a preliminary computation of the dimensions of the standard turbine in relation to the dimension of the reacting vessel in which... Continue Reading

CONSTRUCTION OF WHEEL BARROW ABSTRACT Wheel barrow is used for transporting loads of heavy or bulky by pushing it form one place to another. A 100kg wheel barrow was constructed using material like; Bucket - 2.5mm galvanized steel, 700mm span Carriage - 3mm mild steel Stand - 45mm wide x4mm width steel And other parts of like Braces, Rim, and... Continue Reading