STUDIES ON CORROSION INHIBITION POTENTIAL OF INDIGO CARMINE ON MILD STEEL IN ACIDIC MEDIUM

  • Type: Project
  • Department: Chemistry
  • Project ID: CHM0085
  • Access Fee: ₦5,000 ($14)
  • Pages: 43 Pages
  • Format: Microsoft Word
  • Views: 430
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

ABSTRACT

Studies on corrosion inhibition potential of Indigo Carmine extract on mild steel in acidic medium was carried out using weight loss and electrochemical techniques. It was observed that the Indigo Carmine extract retarded the dissolution of mild steel in the acidic medium. The corrosion rate decrease with increase in concentration. The CR decrease from 37.59mm/yr to 27.50mm/yr in presence of the inhibitor. The CR also increase with increase in temperature up to 60oC. The increase in CR with temperature suggests both physical and chemical adsorption of the Indigo Carmine (IC) on the mild steel. Potentiodynamic polarization measurements showed reduction in corrosion rate of mild steel surface. The potentiodynamicstudies shows a corrosion inhibition of 26.8% by the extract. Indigo Carmine was therefore found effective in inhibiting the corrosion of mild steel in acid medium.


 

TABLE OF CONTENTS

Contents

TITLE PAGE.. i

DECLARATION.. ii

CERTIFICATION.. iii

ACKNOWLEDGEMENT.. v

ABSTRACT.. vi

TABLE OF CONTENTS. vii

LIST OF FIGURES. ix

LIST OF TABLES. x

CHAPTER ONE.. 1

1.0 INTRODUCTION.. 1

1.1 Corrosion. 1

1.2 Causes and Economic effects of corrosion. 1

1.3 Mechanism of corrosion inhibition. 6

1.4 Corrosion Inhibition. 7

1.3 Mild steel9

1.4 AIMS AND OBJECTIVES. 10

CHAPTER TWO.. 11

2.0 LITERATURE REVIEW... 11

CHAPTER THREE.. 16

3.0        MATERIALS AND METHODS. 16

3.1        Apparatus and Reagents. 16

3.2        Preparation of Extract16

3.3 Preparation of Mild Steel17

3.4 Weight Loss Experiment17

3.5 Temperature Dependence Measurements. 18

3.6 Electrochemical Measurement18

CHAPTER FOUR.. 19

4.0 RESULTS AND DISCUSSIONS. 19

4.1 Effect of Inhibitor Concentration on Corrosion Rate. 19

4.2 Effect of Temperature. 19

4.3 Adsorption Studies. 20

4.4 Electrochemical Measurement22

CHAPHTER FIVE.. 25

5.0 CONCLUSIONS AND RECOMMENDATION.. 25

5.1 CONCLUSIONS. 25

5.2 RECOMMENDATION.. 25

REFERENCES. 26

APPEDIX A.. 29

APPEDIX B.. 29

APPEDIX C.. 30

 

 

 

 

 

 

 

 

 

 

 

 

 

LIST OF FIGURES

FIGURE        TITLE                                                                                                       PAGE

1.1                   Oil pipeline Corrosion             -           -           -           -           -           -           3

1.2                   Gas pipeline corrosion -           -           -           -           -           -           3

1.3                   Inner view of corroded pipeline         -           -           -           -           -           4

1.4                   Corrosion in heat exchanger   -           -           -           -           -           -           5

1.5                   Corrosion in heat exchanger   -           -           -           -           -           -           6

1.6                   Corrosion in boilers.    -           -           -           -           -           -           -           6

1.7                   Stainless steel sheet before and after pickling            -           -           -           9

4.1                   Variation of corrosion rate (gcm-2h-1) with concentration of inhibitor -         19

4.2                   Arrhenius plot for mild steel corrosion in Blank         -           -           -           21

4.3                   Arrhenius plot for mild steel corrosion in 10ppm Indigo Carmine     -           21

4.4                   Transition state plot for mild steel corrosion in Blank            -           -           23

4.5                   Transition state plot for mild steel corrosion in 10ppm of Indigo Carmine - 23

 

 


 

LIST OF TABLES

TABLE          TITLE                                                                                                       PAGE

4.1                   Arrhenius Parameters for the Inhibition of the Corrosion of Mild Steel        22

4.2                   Value for thermodynamic Parameters calculated from Transition state

adsorption plot            -           -           -           -           -           -           -           24

4.3                   Table of values obtained from linear polarization measurement         -           24

STUDIES ON CORROSION INHIBITION POTENTIAL OF INDIGO CARMINE ON MILD STEEL IN ACIDIC MEDIUM
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Chemistry
  • Project ID: CHM0085
  • Access Fee: ₦5,000 ($14)
  • Pages: 43 Pages
  • Format: Microsoft Word
  • Views: 430
Payment Instruction
Bank payment for Nigerians, Make a payment of ₦ 5,000 to

Bank GTBANK
gtbank
Account Name Obiaks Business Venture
Account Number 0211074565

Bitcoin: Make a payment of 0.0005 to

Bitcoin(Btc)

btc wallet
Copy to clipboard Copy text

500
Leave a comment...

    Details

    Type Project
    Department Chemistry
    Project ID CHM0085
    Fee ₦5,000 ($14)
    No of Pages 43 Pages
    Format Microsoft Word

    Related Works

    SYNERGISTIC EFFECT OF DATURA STRAMONIUM LEAVES EXTRACT - Z2n+ ON THE CORROSION INHIBITION OF MILD WELLWATER ABSTRACT The synergistic effect of Datura stramonium leaves extract and Zn2+ in the corrosion inhibition of mild steel in aqueous medium (100ml well water) was investigated in this project. The corrosion inhibition studies were carried out... Continue Reading
    This study covers the evaluation of the synergistic effect of Datura stramonium leaves extract-Zn2+ in the corrosion inhibition of mild steel in well water. Varying effects of different concentrations of the extract and 5ppm of Zn2+ on the corrosion inhibition of the mild steel specimen will be determined in order to ascertain the synergistic... Continue Reading
    Abstract Weight loss and Density Functional Theory (DFT) methods were used to study the corrosion inhibition of 5-methyl-2H-imidazol-4-carboxaldehyde and 1H-Indole-3-carboxaldehyde on mild steel in acid medium. The values of thermodynamic parameters such as free energy of adsorption (ΔGºads), adsorption equilibrium constant (Kads), adsorption... Continue Reading
    Abstract It is of no doubt that one day, fossil fuels, which the whole world highly depends on, will come to a halt in a few decades to come. To this reason, researches have been geared towards alternative sources of energy: biodiesel, a form of renewable energy (energy that can be regenerated once used up), is one that has been made known and... Continue Reading
    It is of no doubt that one day, fossil fuels, which the whole world highly depends on, will come to a halt in a few decades to come. To this reason, researches have been geared towards alternative sources of energy: biodiesel, a form of renewable energy (energy that can be regenerated once used up), is one that has been made known and being tested... Continue Reading
    THE INHIBITORY EFFECT OF ETHANOLIC EXTRACT OF MORINGA OLEIFERA LEAF ON THE CORROSION OF MILD STEEL IN 5 M AND 1 M HYDROCHLORIC ACID (HCl)   DEPARTMENT OF PURE AND APPLIED CHEMISTRY   ABSTRACT The extract of Moringa oleifera leaf in aqueous 5 M HCl and 1 M HCl was systematically investigated to ascertain its inhibitory effect on the corrosion of... Continue Reading
    This project covers a study of the effect of seawater corrosion on 0.34% and 0.36% carbon steel  compositions. Two (2) specimens (steel rods) of length 150mm (each) for both steel compositions were  obtained. Out of each was gotten four (4) specimens of 10mm length, 10mm diameter and two  (2) specimens of 50mm length, 10mm diameter. This... Continue Reading
    This project covers a study of the effect of seawater corrosion on 0.34% and 0.36% carbon steel compositions. Two (2) specimens (steel rods) of length 150mm (each) for both steel compositions were obtained. Out of each was gotten four (4) specimens of 10mm length, 10mm diameter and two (2) specimens of 50mm length, 10mm diameter. This yielded a... Continue Reading
    ABSTRACT This study investigated the corrosion resistance of steel reinforcement in two types of concrete mixtures – ordinary Portland (OPC) used for concrete and clay pozzolana cement (CPC) used for concrete. These two concrete types were exposed to 3% and 5% (W/V) of Sodium Chloride (NaCl) and 3% (W/V) Calcium Hypochlorite (Ca(OCl)2) that... Continue Reading
    Carbon steel corrosion is a commonly encountered issue in pipelines transporting hydrocarbons containing corrosive agents such as CO2, H2S and water. As a result, several corrosion prediction models have been put forward over the years although no standard model exists for corrosion prediction in the industry. Two of such models are the Norsok... Continue Reading
    Call Us
    whatsappWhatsApp Us