INVESTIGATING THE OPTICAL AND MECHANICAL PROPERTIES OF PHOSPHORESCENT SILICONE RUBBER AS A COMPLEMENTARY SOURCE OF LIGHTING

  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0229
  • Access Fee: ₦5,000 ($14)
  • Pages: 48 Pages
  • Format: Microsoft Word
  • Views: 1.1K
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

The household lighting cost accounts for 10% of the electric bill, changing the light bulbs effectively can reduce the long term energy costs significantly. In Nigeria, where less than one percent of the population has access to 24 hours of interrupted power supply there is a need for a complementary, renewable source of light which provides enough illumination at a reasonable price, with assured safety using it and also using for a long duration of time before the need to replace it. Recently, the laws made against the use of incandescent bulbs in some country also calls for a new innovation in the lightning industry. Therefore, research has increased in the growing field of conductive polymer exhibiting the phosphorescence property. Thus, this project critically examine, through investigation the optical and mechanical properties that enables phosphorescence to occur  in a phosphorescene silicone rubber. The result showing the absorption spectrum of the silicone rubber indicates the range of frequencies the specimen could absorb in the white light spectrum using Acetone and Ethyl acetate. The experiment conducted on the elasticity of the material gives information about its Young Modulus. The result obtained from the luminous flux reveals the behavior of the silicone rubber after exposing it to daylight illumination. These results, though not comprehensive enough due to deficit of equipment, stills provide more information for further research.

INVESTIGATING THE OPTICAL AND MECHANICAL PROPERTIES OF PHOSPHORESCENT SILICONE RUBBER AS A COMPLEMENTARY SOURCE OF LIGHTING
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0229
  • Access Fee: ₦5,000 ($14)
  • Pages: 48 Pages
  • Format: Microsoft Word
  • Views: 1.1K
Payment Instruction
Bank payment for Nigerians, Make a payment of ₦ 5,000 to

Bank GTBANK
gtbank
Account Name Obiaks Business Venture
Account Number 0211074565

Bitcoin: Make a payment of 0.0005 to

Bitcoin(Btc)

btc wallet
Copy to clipboard Copy text

500
Leave a comment...

    Details

    Type Project
    Department Electrical Engineering
    Project ID ELE0229
    Fee ₦5,000 ($14)
    No of Pages 48 Pages
    Format Microsoft Word

    Related Works

    ABSTRACT This work investigates the optical properties of glass prepared using Otamiri Silica sand mixed with analytical grade oxides as a function of their composition. Three batches were prepared with Phosphorus as the main variable of the SiO2-Na2OB2O3-CaO-ZnO glass system. The glass was melted in a ceramic crucible with a lid and the glasses... Continue Reading
    ABSTRACT Complementary foods were formulated using sorghum, African yam bean and crayfish. The nutrient composition, functional properties and organoleptic attributes of the formulated complementary foods were investigated. The different flours were combined in the ratios of; 70:20:5, 80:15:5, 75:20:5, of sorghum, African yam bean and crayfish... Continue Reading
    ABSTRACT Complementary foods were formulated using sorghum, African yam bean and crayfish. The nutrient composition, functional properties and organoleptic attributes of the formulated complementary foods were investigated. The different flours were combined in the ratios of; 70:20:5, 80:15:5, 75:20:5, of sorghum, African yam bean and crayfish... Continue Reading
    Abstract Nowadays, ZnO is considered as the most important chemical compounds due their distinctive properties owing to its wide band gab and large exciton binding energy. It is well known that the structural and the optical properties of ZnO differ by different methods of preparation. Therefore, in this work, ZnO power was prepared by two... Continue Reading
    OPTICAL AND STRUCTURAL PROPERTIES OF COPPER ALUMINUM DISELENIDE (CuAlSe 2 ) COMPOUND THIN FILMS ABSTRACT A low cost chemical bath deposition technique has been used for the preparation of Copper aluminum diselenide (CuAlSe2) thin films onto commercial microscope glass substrates. The values of deposition parameters were varied such as... Continue Reading
    ABSTRACT The main aim of the research is to study the mechanical properties of concrete and heir effects in concrete stability and failure. He fractures mechanical properties in particular uniaxial tensile strength Ft, young’s modules Eo and fractures energy Gf as sell as the shape of the stress strain and the stress- deformation relation  were... Continue Reading
    ABSTRACT The main aim of the research is to study the mechanical properties of concrete and heir effects in concrete stability and failure. He fractures mechanical properties in particular uniaxial tensile strength Ft, young’s modules Eo and fractures energy Gf as sell as the shape of the stress strain and the stress- deformation relation  were... Continue Reading
    PHYSICAL AND MECHANICAL PROPERTIES OF NERICA PADDY                                                       CHAPTER ONE 1.0 INTRODUCTION: 1.1 RESEARCH BACKGROUND: After harvest, agro raw materials are normally handled, transported, dried, stored... Continue Reading
    CHAPTER ONE 1.0 INTRODUCTION: 1.1 RESEARCH BACKGROUND: After harvest, agro raw materials are normally handled, transported, dried, stored and further processed into food, feed and fiber. In some basic post harvest activities, separation processes such as sorting, grading and cleaning are involved. In mechanized operations, these post harvest... Continue Reading
    ABSTRACT This study investigation on the mechanical properties of Sagbama rice granite was analyzed to determine the load that would cause ultimate flexural stress on the material when used in concrete construction .This is necessary to make decision on where it is suitable for use. This study requires the production of 12 concrete beams of... Continue Reading
    Call Us
    whatsappWhatsApp Us