Electrical Engineering Project Topics and Materials

Showing 1 - 25 of 530

1) UNKNOWN

  The main purpose of this Project is to learn the basic of Digital Electronics before ones put them into practice in the real world. This    The main purpose of this Project is to learn the basic of Digital Electronics before ones put them into practice in the real world. This entails learning the basic of Digital Electronics with the use of... Continue Reading

2) DESIGN AND IMPLEMENTATION OF WIRELESS E-MENU RESTAURANT ORDERING SYSTEM FINAL YEAR PROJECT REPORT SUBMITTED IN PARTIAL FULFILMENT OF THE REQUIREMENTS FOR THE AWARD OF THE DEGREE

ABSTRACT Automation plays a very important role in every field of human life. This project presents a simple design and implementation of a Wireless E-menu Restaurant Ordering System in which the traditional paper-based menu isreplaced by a user friendly Matrix keypad-based menu. The system has Atmega 328P microcontroller which is interfaced with... Continue Reading

3) PASSWORD BASED SECURITY GATE SYSTEM POWERED BY HYBRID POWER SUPPLY WITH SOLAR CHARGING SYSTEM

ABSTRACT Automatic gate is one of most usefully thing to use in companies, colonies, collages, homes, and schools. There is some type to operate a gate such as a sliding on screw or on rack and pinion, piston operated, rotary. Design is available for some type of operation and it is most costly also When installation and maintenance cost is not... Continue Reading

4) EXERGY ANALYSIS OF COMBINED CYCLE POWER PLANT (GARRI”2” 180 MW)

ABSTRACT In recent years the entire world is a warring about energy resources limitation, specifically Sudan country confronts critical crises in fossil fuel resources and yet more of electricity energy producing from fired thermal power plants. One from these plants Garri”2” combined cycle producing about 180MW. Exergy analysis in the light... Continue Reading

5) DESIGN AND CONSTRUCTION OF AUTOMATIC CHANGE-OVER FOR THREE PHASES

ABSTRACT          The main aim of any electric power supply in the world is to provide uninterrupted power supply at all times to all its consumers. Although in developing countries, the electric power generated to meet the demands of the growing consumers of electricity is insufficient hence instability and outage.  Power instability or... Continue Reading

6) MODELING OF CORE LOSS IN INDUCTION MACHINE

Abstract Induction machine account for about 60percent of the electrical consumption in industrial countries; hence a huge energy savings could be achieved by even a small increment in the machine efficiency. Improving the designs of induction machines requires accurate quantification of the machine losses. A significant portion of the losses in... Continue Reading

7) DESIGN AND CONSTRUCTION OF 36W AUTOMATIC SOLAR STREET LIGHT USING SOLAR PANEL, CHARGE CONTROLLER, LED AND WITH BATTERY

CHAPTER ONE INTRODUCTION 1.1Background Information Electricity is a general term comprising of a variety of phenomena resulting from the presence and flow of electric charge. These include many phenomena, such as lightning, static... Continue Reading

8) SQUARE WAVE TO SINOUNSIDAL WAVE FORM

The availability and stability of electrical energy is necessary for domestic and industrial use. But unfortunately the monopoly which the Power holding company of Nigeria (PHCN) enjoys in this country is not in favor of the electricity users, because the supply is never constant and damages occur due to inconsistency of this supply is very... Continue Reading

9) SPEED CONTROL OF MARINE DIESEL ENGINE SELF-TUNING BASED ON FUZZY PID CONTROL AND GENETIC ALGORITHM PID

The mathematical model of diesel engine and its speed regulation system are presented and computer simulation is conducted in Matlab software. Simulation results verify that the proposed method improves the control accuracy of speed of diesel engine. A fuzzy PID hybrid controller and a Genetic Algorithm PID of parameter self-adjusting is put... Continue Reading

10) STORE MANAGEMENT SYSTEM TO JIT

Abstract My project is to improve JIT store management system from manual to automated system.   Which is used to avoid problem faced by store keeper when store material manually. Store is the place where many varieties of materials are kept for the purpose of work. So at a time of storage is hard to write in document all material listing by... Continue Reading

11) A LOW COST ANTI-THEFT TRACKING SYSTEM FOR ELECTRIC VEHICLES

ABSTRACT A vehicle tracking system is any technology that can be used to access the location of a vehicle; either in real time or offline. However, for many car owners, especially on the continent of Africa, vehicle tracking is a luxury which only a few people can afford. Many people are struggling to get a car in the first place. Analysis of... Continue Reading

12) PRIVACY-BY-DESIGN FOR INTERNET OF THINGS(IOT): IMPLEMENTING USER AUTONOMOUS OPTIONS IN A SMART HOME SCENARIO

Abstract In traditional Internet of Things (IoT) systems, users are unable to authorize and/or deauthorize the collection of user data. Hence, the problem of the absence of user autonomy in IoT systems. The project aims to tackle this problem by suggesting a human-centered privacy-by-design option in the design and implementation of IoT systems.... Continue Reading

13) ELECTRIC VEHICLE CHARGING INFRASTRUCTURE WITH THREE-WAY AUTOMATIC SWITCH

Abstract Electric Vehicle (EV) technology is one of the steps in battling climate change through electrification of transport systems. Great advances in energy to size and energy to cost ratios have presented a great opportunity allowing all auto manufacturers to jumped for the idea of electrification as the future of transportation. The journey... Continue Reading

14) MODELING MODELINGAND PARAMETER EXTRACTION OF A AND PARAMETER EXTRACTION OF A 214 MVA TURBO- 214 MVA TURBO-GENERATOR DRIVEN BY DC GENERATOR DRIVEN BY DC MOTORS DURING OFF- MOTORS DURING OFF-LI

Abstract This thesis aims to extract d-axis machine parameters of a 214 MVA high-speed turbogenerator using well-established offline techniques. MATLAB/SIMULINK tool has been utilized to model the generator and perform sudden short-circuit (SSC) tests. Because constant speed operation of the generator is vital consideration for the accuracy of SSC... Continue Reading

15) DEVELOPMENT OF COUNTERMEASURES AGAINST SOME INTERNET SECURITY THREATS

The internet is an unavoidable infrastructure that can provide enormous benefits to the average person/organization. Unfortunately there are elements whose goal is to interfere with the smooth benefits of it to users for either mischief or criminal intent. This has spawned a bourgeoning industry that focuses on developing and deploying... Continue Reading

16) A FAULT DETECTION AND PROTECTION SCHEME FOR A 200 MVA TRANSFORMER USING FUZZY LOGIC

ABSTRACT Condition monitoring of Electrical power equipment has attracted considerable attention for years. The aim of this work is to use Fuzzy logic (FL) Tool Box in building a simulation system that will diagnose all kinds of incipient faults, phase to phase fault and overloading in a transformer and monitor its conditions. Current and rate of... Continue Reading

17) APPLICATION OF COMMON MANAGEMENT INFORMATION PROTOCOL (CMIP) IN ATM NETWORK BANDWIDTH ALLOCATION SYSTEM

Asynchronous Transfer Mode (ATM) of transmission is designed as a Broadband Integrated Services Digital Network (B-ISDN) transfer mode that supports a wide range of traffic classes with diverse flow characteristics. ATM guarantees different quality of service (QoS) demands placed on a network by different services (traffic types). The above... Continue Reading
  • Type:Project
  • ID:ELE0510
  • Pages:100

18) DESIGN OF AN ELECTRONIC SIREN CIRCUIT

Siren is a device that produces loud noise. They are the means communication. Sirens  can be seen in emergency vehicles such as police cars, ambulances and fire trucks. Generally, sirens are used as indication or warning. There are different circuits to  produce different sirens.  The word siren first originated in Greek mythology and was also... Continue Reading

19) DESIGN AND CONSTRUCTION OF 2KVA INVERTER

ABSTRACT This project presents the design and construction of a DC to AC inverter system. It is designed to meet up with the power demand in the offices/homes in the absence of power supply from National Supply Authority.  It is designed in such a way that it will take up to 12V DC from battery and inverts it to an output of 220V, 50Hz AC. It... Continue Reading

20) DESIGN AND IMPLEMENTATION OF AN ANDROID BASED AUTOMATIC SECTOR ANTENNA POSITIONING USING ATMEGA328P. (CASE STUDY: NAMUYENJE SITE IN MOKONO)

ABSTRACT.  To achieve most accurate coverage area results during installations of sector antennas, the technical team must create a coverage map for each of the sectors basing on the provided coverage values. The technical team uses these values to make manual position adjustments of sector antennas. Manual antenna adjustments are sometimes risky... Continue Reading

21) DESIGN & IMPLEMENTATION OF SMART ONLINE SWITCHING APPLIANCES USING RASPBERRY PI

TABLE OF CONTENTS DECLARATION................................................................................................................................. i APPROVAL....................................................................................................................................... ii... Continue Reading

22) DESIGN AND IMPLEMENTATION OF GSM BASED INDUSTRIAL PROCESS MONITORING AND CONTROL SYSTEM

TABLE OF CONTENTS DECLARATION........................................................................................................................i APPROVAL..............................................................................................................................ii MR. ADABARA... Continue Reading

23) DESIGN AND IMPLEMENTATION OF AN AC/DC POWER HARVESTING USING HUMAN FOOT STEP

ABSTRACT As the demand of energy is increasing day by day, so the ultimate solution to deal with these sorts of problems is just to implement the renewable sources of energy Humans are using the renewable energy which are solar, wind etc. but we still could not satisfy our power needs, because of that we have to generate electricity through each... Continue Reading

24) DESIGN AND IMPLEMENTATION OF INDUSTRIAL POWER CONTROL BY INTEGRAL CYCLE SWITCHING WITHOUT GENERATING HARMONIC (CASE STUDY: KAKIRA SUGAR WORKS)

TABLE OF CONTENTS Declaration....................................................................................................................................... i Approval .......................................................................................................................................... i... Continue Reading

25) DESIGN & IMPLEMENTATION OF AN INDUSTRIAL HEALTH AND SAFETY MONITORING AND PREVENTION SYSTEM USING RADIO FREQUENCY TECHNOLOGY

TABLE OF CONTENTS DECLARATION ..................................................................................................................i APPROVAL.........................................................................................................................ii... Continue Reading
Need help with your Electrical Engineering Project Topic? Click here to request assistnce or reach us on + 234 813 0686 6500
whatsappWhatsApp Us