THE CONSTRUCTION AND FABRICATION OF A CANDLE MOULDING MACHINE

  • Type: Project
  • Department: Mechanical Engineering
  • Project ID: MCE0139
  • Access Fee: ₦5,000 ($14)
  • Pages: 54 Pages
  • Format: Microsoft Word
  • Views: 1.3K
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853
ABSTRACT
The candle molding machine is a vital device which cannot be done without, in any nation. This is because of the indispensable role candle plays, especially when there is no either source of light.
In order to enhance adequate supply to both urban and rural consumers, the production of a candle molding machine is important.
The major component of the candle molding machine are: the castled aluminum body, the adjustable screw, which serves as a separation between the too moulds cop and drag (male and female).
The reason why there is no cooling system is because the body is made of non – ferrous metal (aluminum) which does not create much vacuum for heat addition as much as steel do and also the mould has operate in opening system which admit natural air inside the mould when opened to cool the max and enhance the quick solidification of the wax. The mould due to its opening system, it works more efficiently under cool whether condition.
 
TABLE OF CONTENTS
Title Page
Approval Page
Signature Page
Release Page
Letter of Transmittal
Dedication
Acknowledgement
Abstract
Table of Contents

CHAPTER ONE
1.0Introduction
1.1Background Information of Candle Moulding Machine
1.2Problems of the Project (Candle Moulding)
1.2.1Lack of Research Materials
1.2.2Cost Involvement
1.2.3Time Factor
1.2.4Market Demand
1.2.5Thread Centering Mechanism
1.3Aims and Objectives of the Investigation on Candle Moulding Machine7
1.3.1Production of Cost of Production
1.3.2Improvement on the Pouring Mechanism
1.3.3Improving Market Demand
1.3.4Improving of the Thread Centering Mechanism

CHAPTER TWO
Literature Review
2.2One Structure System
2.3The major problems foreseen in such a system are  
2.4The threading device
2.5The feeding channels
2.6Cutting Device

CHAPTER THREE
Design Concepts and Analysis

CHAPTER FOUR
Mode of Construction

CHAPTER FIVE 
Cost

CHAPTER SIX
Conclusion and Recommendation
References

THE CONSTRUCTION AND FABRICATION OF A CANDLE MOULDING MACHINE
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Mechanical Engineering
  • Project ID: MCE0139
  • Access Fee: ₦5,000 ($14)
  • Pages: 54 Pages
  • Format: Microsoft Word
  • Views: 1.3K
Payment Instruction
Bank payment for Nigerians, Make a payment of ₦ 5,000 to

Bank GTBANK
gtbank
Account Name Obiaks Business Venture
Account Number 0211074565

Bitcoin: Make a payment of 0.0005 to

Bitcoin(Btc)

btc wallet
Copy to clipboard Copy text

500
Leave a comment...

    Details

    Type Project
    Department Mechanical Engineering
    Project ID MCE0139
    Fee ₦5,000 ($14)
    No of Pages 54 Pages
    Format Microsoft Word

    Related Works

    THE DESIGN AND FABRICATION OF A CANDLE MOULDING MACHINE ABSTRACT The idea of producing “candle stick” brought the existence of fabricating a “candle moulding machine” which can produce a desired shape of a candle foe the benefit of mankind. In chapter 1, which is the research work of the project carried out, the problem encountered and the... Continue Reading
    ABSTRACT The air of this project is to design and fabricate a bench shearing machine which can complete favorably with the imported ones. this machine is designed and fabricate, using our cheap and available materials. Some qualities such as durability, reliability and portability are guaranteed. It is functional and can cut or shear a metal of up... Continue Reading
    ABSTRACT The aim of this project is to design and fabricate a bench shearing machine which can complete favorably with the imported ones. this machine is designed and fabricate, using our cheap and available materials. Some qualities such as durability, reliability and portability are guaranteed. It is functional and can cut or shear a metal of up... Continue Reading
    ABSTRACT The candle mould has twenty four (24) holes which could produce twenty four (24) quality candle sticks Aluminum, a non ferrous metal was used as the construction material for the mould the type of casting technique used was green sand mould method. In the process of moulding the... Continue Reading
    ABSTRACT The candle mould has twenty four (24) holes which could produce twenty four (24) quality candle sticks Aluminum, a non ferrous metal was used as the construction material for the mould the type of casting technique used was green sand mould method. In the process of moulding the pattern was placed in the flask which contained the green... Continue Reading
    ABSTRACT The candle mould has twenty four (24) holes which could produce twenty four (24) quality candle sticks Aluminum, a non ferrous metal was used as the construction material for the mould the type of casting technique used was green sand mould method. In the process of moulding the pattern was placed in the flask which contained the green... Continue Reading
    ABSTRACT This research relates to a candle composition containing non-hydrogenated oil and at least one of long chain hydrocarbon and long-chain hydrocarbon derivatives. A candle composition having non-hydrogenated oil and a solidifying amount of congealing reagent. A candle... Continue Reading
    ABSTRACT           This research relates to a candle composition containing non-hydrogenated oil and at least one of long chain hydrocarbon and long-chain hydrocarbon derivatives. A candle composition having non-hydrogenated oil and a solidifying amount of congealing reagent.... Continue Reading
    PREFACE Our purpose of embarking on the construction of a project of this type is to present a vivid and understandable fact that if given the necessary supports, that we the youth and Engineers in potentials can move this country forward as regards to technological endeavours. Such as bird eye-view right from... Continue Reading
    PREFACE Our purpose of embarking on the construction of a project of this type is to present a vivid and understandable fact that if given the necessary supports, that we the youth and Engineers in potentials can move this country forward as regards to technological endeavours. Such as bird eye-view right from... Continue Reading
    Call Us
    whatsappWhatsApp Us