CONSTRUCTION OF FLOW NOZZLE

  • Type: Project
  • Department: Mechanical Engineering
  • Project ID: MCE0316
  • Access Fee: ₦5,000 ($14)
  • Pages: 45 Pages
  • Format: Microsoft Word
  • Views: 412
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853
ABSTRACT

The project title “fabrication of flow nozzle†was done by a selected group of Engineering Students and the practiced objective (aim) of the project was centered on constructing a nozzle that is capable of transporting fluid from one to the other, to determine the charge in velocity of the moving fluid across two given areas of the nozzle and to be able to measure the quantity of fluid that will flow through the nozzle for a given period of time.
However, the construction of the nozzle was done with materials obtainable locally and the science of operation carried out in constructing the nozzle was; cleaning, marking out, cutting off, drilling, folding, centre punching, assembling, welding, filling, testing and painting. 
The flow nozzle was constructed based on the following specifications and dimensions;
Throat Diameter60mm
The diameter of the duct pipe 140mm
The length of the up stream pipe 200mm
The thickness of the nozzle3.8mm
The length of the down stream pipe 200mm
The height of the nozzle820mm
The length of the nozzle690mm
The size of the pressure valves½ inch
Furthermore, the selection of materials for the construction of this flow nozzle was based on the factors which includes; ductility, malleability, fabricability, mechanical strength and stability, availability, corrosion resistance and lastly cost factor.
Finally, the constructed flow nozzle and all other expenses cost N8,000.


TABLE OF CONTENTS

Title page
Approval page
Letter of transmittal
Dedication
Acknowledgement 
Table of contents
Abstract

CHAPTER ONE
1.0Introduction
1.1Definition of flow nozzle
1.2History of metering devices
1.3The scope of the project

CHAPTER TWO
2.0Literature review
2.1Theory of flow nozzle
2.2The characteristics of the nozzle
2.3Types of flow nozzle
2.4Advantages of flow nozzle
2.5Disadvantages of flow nozzle
2.6The uses of flow nozzle

CHAPTER THREE
3.0The method of construction

CHAPTER FOUR
4.0The Method Of Construction

CHAPTER FIVE
5.0Discussion
5.1Costing analysis

CHAPTER SIX
5.0Conclusion

CHAPTER SEVEN
7.0Recommendation
References
Nomenclature
Appendices

CONSTRUCTION OF FLOW NOZZLE
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Mechanical Engineering
  • Project ID: MCE0316
  • Access Fee: ₦5,000 ($14)
  • Pages: 45 Pages
  • Format: Microsoft Word
  • Views: 412
Payment Instruction
Bank payment for Nigerians, Make a payment of ₦ 5,000 to

Bank GTBANK
gtbank
Account Name Obiaks Business Venture
Account Number 0211074565

Bitcoin: Make a payment of 0.0005 to

Bitcoin(Btc)

btc wallet
Copy to clipboard Copy text

500
Leave a comment...

    Details

    Type Project
    Department Mechanical Engineering
    Project ID MCE0316
    Fee ₦5,000 ($14)
    No of Pages 45 Pages
    Format Microsoft Word

    Related Works

    REPORT ON FABRICATION OF FLOW NOZZLE ABSTRACT The flow nozzle was constructed based on the dimensions and specifications of the international standard organization (I.S.O) recommendation. Throat diameter 42.5mm Length converging nozzle 68mm Thickness of nozzle 2mm Diameter of major axis of ellipse 85mm Diameter of minor axis of ellipse 56.6mm... Continue Reading
    ABSTRACT Construction projects are complex and risky. According to the literature, even profitable construction companies can fail due to poor cash flow. In order to survive in this rapidly changing environment, effective cash flow management is essential. Many unforeseen factors affect a construction project’s cash flow. The objective of the... Continue Reading
    ABSTRACT Construction projects are complex and risky. According to the literature, even profitable construction companies can fail due to poor cash flow. In order to survive in this rapidly changing environment, effective cash flow management is essential. Many unforeseen factors affect a construction project’s cash flow. The objective of the... Continue Reading
    ABSTRACT Cardiac outpatients are those with heart-related diseases but are not on admission.Nieuwe Nike Air Max 2015 Dame.  In the present study, a stochastic approach was used for modeling the cardiac outpatient flow in Nnamdi Azikiwe University Teaching Hospital (NAUTH) Nnewi in a way to solving the long waiting times cardiac outpatient... Continue Reading
    Groundwater contamination occurs when man-made products such as gasoline, oil, road salts  and chemicals get into the groundwater and cause it to become unsafe and unfit for human  use. Drinking contaminated groundwater can have serious health effects. Diseases such as  hepatitis and dysentery may be caused by contamination from septic tank... Continue Reading
    ABSTRACT The refurbishment of the fluid flow demonstration unit was carried out in the Chemical Engineering pilot plant laboratory of the Institute of Management and Technology Enugu. The refurbishment process was carried out to ensure adequate functioning of the unit, to allow the continuous use of equipment in the pilot plant, so that student... Continue Reading
    ABSTRACT The refurbishment of the fluid flow demonstration unit was carried out in the Chemical Engineering pilot plant laboratory of the Institute of Management and Technology Enugu. The refurbishment process was carried out to ensure adequate functioning of the unit, to allow the continuous use of equipment in the pilot plant, so that student... Continue Reading
    TABLE OF CONTENTS Cover Page        -        -        -        -        -        -        -        - Title Page  -        -        -        -        -        -        -        -        - Certification        -       ... Continue Reading
    (A CASE STUDY OF GUINNESS PLC BENIN CITY) CHAPTER ONE INTRODUCTION 1.1 BACKGROUND OF THE STUDY Cash flow is generally acknowledged as the single most pressing concern of the Small/Medium Scale Enterprise (SME). In its simplest form cash flow is the movement of money in and out of... Continue Reading
    ABSTRACT The refurbishment of the fluid flow demonstration unit was carried out in the Chemical Engineering pilot plant laboratory of the Institute of Management and Technology Enugu. The refurbishment process was carried out to ensure adequate functioning of the unit, to allow the continuous use of equipment in the pilot plant, so that student... Continue Reading
    Call Us
    whatsappWhatsApp Us