Petroleum Engineering Project Topics and Materials

ABSTRACT The effectiveness of Terminalia catappa (tropical almond) and Tamarindus indica (tamarind) as corrosion inhibitors for stainless steel in 1M hydrochloric acid at 30°C, 40°C and 50°C was investigated in this research. The gravimetric method of analysis was employed for 20 days at a 4-day interval using 0.9, 1.1 and 1.3g/15mL of... Continue Reading

Abstract Biodiesel is a renewable fuel that will soon be fully accepted in the commercial world but there are limitations to its use that need improvement. The use of oxygenated additives have improved the burning/fuel qualities of conventional diesel and gasoline. These oxygenates may also improve the qualities of biodiesel. This paper focuses on... Continue Reading

ABSTRACT This research involves the application of pyrolysis has been viewed as an efficient means for the proper disposal of waste plastics in the environment amongst others. In this research, the influence of two catalysts namely; Zeolite and Titanium (IV) oxide are examined. Zeolite as a catalyst has obtained approval due to its ability to... Continue Reading

Abstract Biodiesel is a biodegradable, environment friendly, renewable and energy efficiency fuel. It is becoming the most prominent alternative to petro-diesel. Due to current environmental concerns, quality and properties of biodiesel have to be optimized to remove its limitations. The use of oxygenates additives have proved to play such... Continue Reading

ABSTRACT This research work was carried out to evaluate the laboratory analysis of pipeline products marketing company (PPMC) depot operations.  In the course of the research many scholarly articles on the subject matter were reviewed from which the researcher got lot information concerning the topic at hand. Thus making the research work a... Continue Reading

ABSTRACT This research work was carried out to evaluate the different methods of corrosion prevention, control and monitoring. In the course of the research many scholarly articles on the subject matter were reviewed from which the researcher got lot information concerning the topic at hand. Thus making the research work a reliable source of... Continue Reading

ABSTRACT Deregulation is the removal or simplification of government rules and regulations that constrain the operation of market force. In course of  studying the effect of deregulation, various economic model will be applied  to data gotten from the Nigerian National Petroleum Corporation NNPC for efficient and workable economic policy that... Continue Reading

TABLE OF CONTENT  TITLE PAGE DEDICATION ACKNOWLEDGEMENT ABSTRACT TABLE OF CONTENT CHAPTER 1  INTRODUCTION   1.1 BACKGROUND  1.2 NATURAL GAS AND THE NIGERIAN ECONOMY  1.3 OBJECTIVE  1.4 PROBLEM STATEMENT   CHAPTER II LITERATURE REVIEW     2.1 GAS UTILISATION IN NIGERIA   2.2 LIQUEFIED NATURAL GAS  2.3 FISCHER TROPSCH GAS TO LIQUID... Continue Reading

ABSTRACT   Demulsification (emulsion breaking) is necessary in many practical applications such as the petroleum industry, painting and waste-water treatment in environmental technology. Chemical demulsification is the most widely applied method of treating water-in-crude oil emulsions and involves the use of chemical additives to accelerate the... Continue Reading

ABSTRACT Demulsification (emulsion breaking) is necessary in many practical applications such as the petroleum industry, painting and waste-water treatment in environmental technology. Chemical demulsification is the most widely applied method of treating water-in-crude oil emulsions and involves the use of chemical additives to accelerate the... Continue Reading

ABSTRACT Demulsification (emulsion breaking) is necessary in many practical applications such as the petroleum industry, painting and waste-water treatment in environmental technology. Chemical demulsification is the most widely applied method of treating water-in-crude oil emulsions and involves the use of chemical additives to accelerate the... Continue Reading

ABSTRACT This research work was carried out to evaluate the different methods of corrosion prevention, control and monitoring. In the course of the research many scholarly articles on the subject matter were reviewed from which the researcher got lot information concerning the topic at hand. Thus making the research work a reliable source of... Continue Reading

The aim of the project is to develop a numerical tool used to predict vessel motions of a turret moored FPSO, then perform a comparative analysis between the 6 degree of motions measured on the FPSOs during the 7 months period and the predictions from this numerical model. The first step was to carry out statistical and extreme value analysis of... Continue Reading

Carbon steel corrosion is a commonly encountered issue in pipelines transporting hydrocarbons containing corrosive agents such as CO2, H2S and water. As a result, several corrosion prediction models have been put forward over the years although no standard model exists for corrosion prediction in the industry. Two of such models are the Norsok... Continue Reading

ABSTRACT  This project work deals on the feasibility of transferring the Toe – To  – Heel Air Injection (THAI) technology which is a new in-situ  combustion method of heavy oil recovery from Alberta, Canada,  where the technology has recorded success with high rate of recovery  to South-West, Nigeria (Ondo state) for efficient heavy oil... Continue Reading

Natural gas is one of the major sources of fuel and raw material to industries all over the world. However, it contains some acid gases such as C O2 and H2 S which are corrosive and harmful to the environment. These acid gases must be brought to permissible limits to promote safety in the operation and increase the heating value of the natural... Continue Reading

ABSTRACT The maximum recoverable oil in place from the reservoir is a major challenge when it comes to EOR which is an essential part of every oil production project. In some cases, the natural drive mechanism is a relatively inefficient process and results in a low overall oil recovery. The lack of sufficient natural drive in such reservoirs has... Continue Reading

This is a review of The HP HT wells in Niger Delta.... Continue Reading

This study investigated the concentration of heavy metals in oil field produced water from Niger Delta, before and after treatment with locally sourced agricultural wastes. Two produced water samples were investigated for different metal ions such as; Lead, Nickel, Cadmium, Copper, Iron, Magnesium, Chromium, Zinc, Manganese, Calcium, Arsenic,... Continue Reading

ABSTRACT The effect of liquid flow rate, pipe size (diameter) and pipe orientation (inclination) on liquid hold-up was investigated. Liquid flow rate between 500 STB/day and 5000 STB/day was studied. An oil of 25˚API at an average temperature of 175˚F, a gas gravity of 0.65, water cut of 25% with water gravity of 1.07 and containing no free gas... Continue Reading

Abstract Hydraulic fracturing has been an effective technique to stimulate damaged wells or wells producing from low-permeability formation. It has been established that the orientation of a hydraulic fracture is perpendicular to the direction of the least principal stress in the formation. Thus, most pressure transient analysis techniques are... Continue Reading

Abstract Hydraulic fracturing is an effective well stimulation technique which is introduced in the 1950s and widely used in the oil and gas industry. Most of the works about hydraulic fracture assumed that the fracture is symmetric and either vertical or horizontal. But, several field and laboratory observations show very complex fractures,... Continue Reading

Abstract Solution gas drive reservoirs are characterized by rapid and continuous decline of reservoir pressure. This rapid and continuous decline of reservoir pressure causes direct decline of reservoir performance at early stages of the life of the reservoir. The principal source of energy which is gas liberation from the crude oil and the... Continue Reading

ABSTRACT The design of natural flow and artificial lift tubing strings for the whole life of a water drive reservoir was carried out using data based on synthetic reservoir performance based on a material balance. The effects of reservoir properties on the life of the well was also investigated. Constraints such as maximum production, maximum... Continue Reading

ABSTRACT Cuttings transportation during in non-vertical boreholes is necessary for oil and gas wells. Adequate cuttings removal from a well in drilling is critical for cost-effective drilling as high annular cuttings buildup often leads to high risk of stuck pipe, reduced rate of penetration and other impediments to standard drilling and... Continue Reading