Project Topics and Materials - Page 1,499

Showing 37,451 - 37,475 of 39,398

37,451) PRODUCTION AND CHARACTERIZATION OF SOFT SOAP FROM LOCAL POTASH (NGU) OR CAUSTIC POTASH LABORATORY OR COMMERCIAL GRADE

ABSTRACTS This project was aimed at producing a fine high quality toilet soap at a low cost which will be of used to home and commercial purposes. The toilet soap produced has its major components caustic potash, palm kernel oil... Continue Reading

37,452) ALTERNATIVE RAW MATERIAL SOURES FOR CEMENT PRODUCTION

ABSTRACT It is generally known that cement id produced from limestone, mar/clay and gypsum by the following three basic process- wet semi- wet aid dry process. The cost of exploiting the limestone: the major raw material constitute about 50% of the production cost which results in the high cost... Continue Reading

37,453) CONSTRUCTION OF SOAP MOULDS, TABLE AND CUTTERS

ABSTRACT A mould can generally be defined as a pattern constructed for the production of the same shape and size. The constructional material differs from one operation to another. When one considers the money at hand, he decides whether to start from the primary production level or secondary... Continue Reading

37,454) PRODUCTION OF CRUDE OIL-DRILLING PROCESS

ABSTRACT The tremendous (large) demand of some petroleum fractions in our modern world today has drive some professionals (experts) in oil sectors into exploration and drilling operation which is aimed at locating the mineral oil deposit and extracting it from beneath the earth surface with aid of some... Continue Reading

37,455) ETRACTION OF OIL FROM A LOCAL SEED (GROUNDNUT SEED) AND CHARACTERIZATION

ABSTRACT This project “Extraction of oil from a local seed (groundnut oil) and Characterization” was carried out using ten cups of groundnut seeds that was purchased from a local market in Enugu metropolis. The oil these seeds were in Enugu using solvent extraction... Continue Reading

37,456) PRODUCTION OF CASSAVA FLOUR USING TRADITIONAL PROCESSING METHOD AND MODERN PROCESSING METHOD.

ABSTRACT The production of cassava flour by the method of traditional processing method (sun drying) and modern processing method (oven drying) was carried out using cassava sliced cubes or peeled cassava. Indeed, the traditional Nigeria techniques of... Continue Reading

37,457) PRODUCTION OF EMULSION POINT WITH THE AVAILABLE MATERIAL

ABSTRACT This project is on the production of paint from the available materials. The first process involved was the sourcing of the available material which include calcium carbonate (dotonute) water etc. the next step is the proper production procedure. The same product patterns was... Continue Reading

37,458) PRODUCTION OF BLACK AND BROWN POLISH BROWN POLISH

PRODUCTION OF BLACK AND BROWN POLISH BROWN POLISH ABSTRACT This project is aimed at producing black and brown polish of good quality. For clearity, polish is a substance rubbed on the surface of materials to make them smooth and shiny. Polish has being of immense importance in protecting leather surfaces and enhancing their beauty. To produce a... Continue Reading

37,459) ANALYSIS OF ENUGU COAL

ABSTRACT The project Analysis of Enugu Coal was done to determine the characteristic properties of Enugu Coal with particular emphasis on the proximate and ultimate analysis. Coal samples from the Enugu Coal (Onyeama) mine were obtained and pulverized. The coal sample (pulverized) was subjected to proximate and ultimate... Continue Reading

37,460) PRODUCTION OF EMULSION POINT WITH THE AVAILABLE MATERIAL

ABSTRACT This project is on the production of paint from the available materials. The first process involved was the sourcing of the available material which include calcium carbonate (dotonute) water etc. the next step is the proper production procedure. The same product patterns was... Continue Reading

37,461) PRODUCTION OF LOQUID AND VAPOURIZED PERFUME

ABSTRACT This research project was carried out principally for the production of liquid and vapourized perfumes from local raw materials. The local raw material were subjected to various processing conditions in order to obtain purified perfume. The methods generally used in this work include expression... Continue Reading

37,462) ADSORPTION OF PALM OIL WITH SYNTHETIC ADSORBENT (COAL)

ABSTRACT This project was Carrie lent using sub-bituminous coal and crude palm oil. The degree of bleaching of the palm oil was monitored with a spectorphoto meter. The coal was collected in a lump from the mine. It air-chiecl to removed the moisture content and thereafter, size reduced to a... Continue Reading

37,463) INTERFACE MONITORING AND ANALYSIS OF PIPELINE AND PRODUCTS MARKETING COMPANY LIMITED ENUGU DEPOT.

ABSTRACT This research was carried out with the sole aim of monitoring interface in the transportation of petroleum pipeline products and the analysis of this product from Enugu depot. In the research it was observed that product contaminates each... Continue Reading
  • Type:Project
  • ID:CNG0098
  • Pages:128

37,464) MODIFICATION OF PROTO-TYPE AIR CONDITIONING UNIT

ABSTRACT The need for an authentic and reliable report relating to the modification of a proto-type air-conditioning unit is inevitable. Many homes and offices use the air conditioner to cool the temperature in their respective homes and offices, so the maintenance of the air conditioner should be a... Continue Reading

37,465) MANUFACTURE OF CEILING BOARD USING LOCAL MATERIALS

ABSTRACT This project “The Production of Ceiling Board from Local Raw Materials” was carried out basically using raw materials which was sourced locally. These raw materials are found to be very much in abundance. Some are materials sourced from the ground and others are from agricultural... Continue Reading

37,466) FORMULATION AND COMPARISM OF INDUSTRIAL BAR SOAP AND DETERGENT

ABSTRACT Stabilized adhesive was developed and produced. The development was made by the production of samples of the adhesive with varied quantities of the active ingredients and the additives. From the various formulations made, it was observed that formulations A is the best for... Continue Reading
  • Type:Project
  • ID:CNG0095
  • Pages:115

37,467) MAINTENANCE OF PILOT PLANT SPRAY DRYER

ABSTRACT Spray substance are used to make home grnow powered substance whose particles are usually spherical in shape and approximately 10-40 micro s. The maintenance of pilot plant spray dryer was stated with observation of the faults in the spray dryer. The faulty components were dismantled, serviced and... Continue Reading

37,468) REFURBISHING OF A FIXED AND FLUIDIZED BED

ABSTRACT The repair of the fixed bed adsorption column, a product of arm field technical company was carried out for the purpose of bringing the faulty equipment back to its normal operating system. Before this exercise, the equipment was out of operation because of the completely blocked base of the fixed... Continue Reading

37,469) PRODCUTION OF WOOD ADHESIVE

ABSTRACT Adhesive is a substance that holds materials together by surface attachment, while wood adhesive is a substance that is used to hold plywood for furniture works. This substance is essential and has universal applications. Thus the aim of this research work is to produce it using cassava starch as a base binder.... Continue Reading

37,470) TEMPERATURE AND WATER REQUIREMENT FOR LEACHING OF CAUSTIC ALKALT FROM 'NGU'

TEMPERATURE AND WATER REQUIREMENT FOR LEACHING OF CAUSTIC ALKALT FROM ‘NGU’ ABSTRACT The production and analysis of “Ngu” extract for temperature and water requirement for leaching of casuistic alkali is the basic objective of this project. The production was carried out by using unit operations and also using the female inflorescence of a... Continue Reading

37,471) THE ANTIBACTERIAL ACTIVITY OF THREE TYPES OF MEDICATED SOAPS ON STARHYROCOCCUS AUREUS FORM WOULD INFECTIONS

ABSTRACT The antibacterial activity of three type of medicate soap on staphylococcus aureus isolated from wound infections was conducted. Fifty individual with would infection within the age range of 9-73 years were sampled. Swabsticks were... Continue Reading

37,472) THE ROLE OF FEDERAL MORTGAGE FINANCE LIMITED IN HOUSING FINANCE WITH THE FEDERAL MORTGAGE FINANCE LIMITED MAIDUGURI AS CASE STUDY

THE ROLE OF FEDERAL MORTGAGE FINANCE LIMITED IN HOUSING FINANCE CASE STUDY THE FEDERAL MORTGAGE FINANCE LIMITED MAIDUGURI CHAPTER ONE 1.0 INTRODUCTION Shelter is universally accepted as a basic and second most essential human need coming next to food. However, housing in all ramifications is more than mere shelter since it embraces all the social... Continue Reading

37,473) THE ROLE OF CO-OPERATIVES SOCIETIES IN HOUSING DELIVERY (A CASE STUDY OF ENUGU STATE)

ABSTRACT A profession is a vocation whose practice is founded upon an understanding of the theoretical structure of some departments of learning and upon the capabilities accompanying such as understanding. This understanding and these capabilities are applied... Continue Reading

37,474) THE PROBLEM OF SOLID WASTE MANAGEMENT IN ENUGU METROPOLIS

Abstract This research work is aim at examining the practices and problems solid waste management with particular reference to IMT Campus III. The research choose the random sampling Technique based on the population concentration from three (3) location within the study area. The data... Continue Reading

37,475) THE CAUSE OF ABANDONED PUBLIC DEVELOPMENT PROJECTS IN THE FEDERAL CAPITAL TERRITORY ABUJA CASE STUDY FCDA

THE CAUSE OF ABANDONED PUBLIC DEVELOPMENT PROJECTS IN THE FEDERAL CAPITAL TERRITORY ABUJA CASE STUDY FCDA ABSTRACT The continues abandoning of public projects at various levels of development all over the country is of great concern not only to the governments themselves but more to civil servants who are too inadequately accommodated. In this... Continue Reading
whatsappWhatsApp Us