DESIGN AND PERFORMANCE EVALUATION OF A WASTE WATER TREATMENT PLANT.

  • Type: Project
  • Department: Agric Engineering
  • Project ID: AGE0120
  • Access Fee: ₦5,000 ($14)
  • Pages: 24 Pages
  • Format: Microsoft Word
  • Views: 609
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853
The study aimed at the design, construction and performance evaluation of a model domestic wastewater treatment plant was carried out. The treatment unit was a Waste Stabilization Pond (WSP) comprised of one facultative pond, three maturation ponds, and a contact filtration unit, all in series. The effluent of the WSP, after filtration through clay media, had the BOD reduced to 15.4mg/l, from 356mg/L indicating a 95.67% removal level. A Faecal Coliform (FC) count of the influent sample gave 1x108 FC/100ml,. whereas the effluent gave 9 FC/100ml, which was 99.99% FC removal. It was concluded that the effluent from the WSP is therefore suitable for discharge to the environment. It also met the requirement of 25mg/L BOD standard of Federal Environmental Protection Agency (FEPA). A rice husk filter media was found to be non-promising earlier in the removal process. The treatment system can be recommended to private/public estates in order to have a more environmentally friendly discharge of domestic wastewater.
INTRODUCTION
As urban and industrial development increases, the quantity of waste generated also increases. These wastes pose a serious threat to public health when they are not readily disposed off. When these wastes are removed by water carriage system, they are termed wastewater. Wastewater is the used water or liquid waste of a community, which includes human and household waste together with street washings. Industrial waste and such ground and storm water may be mixed with it. The use of domestic wastewater for irrigation is advantageous for many reasons including water conservation, ease of disposal, nutrient utilization, and avoidance of surface water pollution. Nevertheless, it must be borne in mind that although the soil is an excellent adsorbent for most soluble pollutants, domestic wastewater must be treated before it can be used for crop irrigation to prevent the risk to both public and the environment.

This study aimed at designing and constructing a model waste stabilization pond and final contact filtration unit, for the treatment of influent domestic wastewater for environmentally friendlier discharge.

DESIGN AND PERFORMANCE EVALUATION OF A WASTE WATER TREATMENT PLANT.
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Agric Engineering
  • Project ID: AGE0120
  • Access Fee: ₦5,000 ($14)
  • Pages: 24 Pages
  • Format: Microsoft Word
  • Views: 609
Payment Instruction
Bank payment for Nigerians, Make a payment of ₦ 5,000 to

Bank GTBANK
gtbank
Account Name Obiaks Business Venture
Account Number 0211074565

Bitcoin: Make a payment of 0.0005 to

Bitcoin(Btc)

btc wallet
Copy to clipboard Copy text

500
Leave a comment...

    Details

    Type Project
    Department Agric Engineering
    Project ID AGE0120
    Fee ₦5,000 ($14)
    No of Pages 24 Pages
    Format Microsoft Word

    Related Works

    The study aimed at the design, construction and performance evaluation of a model domestic wastewater treatment plant was carried out. The treatment unit was a Waste Stabilization Pond (WSP) comprised of one facultative pond, three maturation ponds, and a contact filtration unit, all in series. The effluent of the WSP, after filtration through... Continue Reading
    This study investigated the concentration of heavy metals in oil field produced water from Niger Delta, before and after treatment with locally sourced agricultural wastes. Two produced water samples were investigated for different metal ions such as; Lead, Nickel, Cadmium, Copper, Iron, Magnesium, Chromium, Zinc, Manganese, Calcium, Arsenic,... Continue Reading
    This study investigated the concentration of heavy metals in oil field produced water from Niger Delta, before and after treatment with locally sourced agricultural wastes. Two produced water samples were investigated for different metal ions such as; Lead, Nickel, Cadmium, Copper, Iron, Magnesium, Chromium, Zinc, Manganese, Calcium, Arsenic,... Continue Reading
    This study investigated the concentration of heavy metals in oil field produced water from Niger Delta, before and after treatment with locally sourced agricultural wastes. Two produced water samples were investigated for different metal ions such as; Lead, Nickel, Cadmium, Copper, Iron, Magnesium, Chromium, Zinc, Manganese, Calcium, Arsenic,... Continue Reading
    water supply and sewerage services in urban areas have in the past commonly been provided by monopolized municipal councils under the previous local government ministry. as part of a general mov... Water Treatment And Purification Process: A Case... Continue Reading
    Water supply and Sewerage services in urban areas have in the past commonly been provided by monopolized Municipal Councils under the previous Local Government Ministry. As part of a general move by the sector to shift to market-led systems by restructuring the sector, a new paradigm emerged to transform water utilities into more modern service... Continue Reading
    water supply and sewerage services in urban areas have in the past commonly been provided by monopolized municipal councils under the previous local government ministry. as part of a general mov... Water Treatment And Purification Process: A Case... Continue Reading
     Water supply and Sewerage services in urban areas have in the past commonly been provided by monopolized Municipal Councils under the previous Local Government Ministry. As part of a general move by the sector to shift to market-led systems by restructuring the sector, a new paradigm emerged to transform water utilities into more modern service... Continue Reading
    ABSTRACT The technical report of this project deals with the design of a water treatment plant model which consists of five tanks. Water treatment plant model is made up of glass with pipe joining them together to allow movement of water from one tank to another. 6mm plain glass is used for base and 5mm plain glass is used for other component.... Continue Reading
    ABSTRACT Biological treatment of wastewater from Wupa Wastewater Treatment Plant, Abuja was investigated. Wastewater samples were collected from the inlet and effluent point (before and after the ultra violet radiation unit) of the treatment plant. The physicochemical parameters; temperature, pH, conductivity, total dissolved solids (TDS), total... Continue Reading
    Call Us
    whatsappWhatsApp Us