TEMPERATURE AND WATER REQUIREMENT FOR LEACHING OF CAUSTIC ALKALT FROM ‘NGU’

  • Type: Project
  • Department: Chemical Engineering
  • Project ID: CNG0449
  • Access Fee: ₦5,000 ($14)
  • Pages: 43 Pages
  • Format: Microsoft Word
  • Views: 520
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853
ABSTRACT 

The production and analysis of “Ngu” extract for temperature and water requirement for leaching of caustic alkali is the basic objective of this project.  The production was carried out by using unit operations and also using the female inflorescence of a palm fruit (Eleasis Guineesis) as raw material. The female inflorescence of palm fruit was size reduced from original dimensions to maintain particle size characteristics.  The size reduced bunches were dried at room temperature and at normal atmospheric pressure; after which the sized reduced bunches were burnt at higher temperature.  The cooled ashes were dissolved, filtered by using a sieve of mesh size and the filtered solution is the “Ngu” extract. The pineapple content of the alkali leached from Ngu ash was potassium hydroxide.  Material and energy balances, equipment sizing with recommended material of construction, costing and profitability analysis was done.  It should however, be noted that a profitable project could be embarked upon if the equipments to be fabricated locally which also reduce foreign exchange being extended on the importation of potassium hydroxide. 
 
TABLE OF CONTENT

COVER PAGE
TITLE PAGE
APPROVAL PAGE
LETTER OF TRANSMITTAL
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
TABLE OF CONTENT

CHAPTER ONE
INTRODUCTION
IMPORTANCE OF POTASSIUM HYDROXIDE
OBJECTIVE OF THE PRODUCT

CHAPTER TWO 
LITERATURE SURVEY 
THE OIL PALM TREE AND IT’S ORIGIN 
VARITIES OF THE OIL PALM
BASIC RAW MATERIALS OBTAINED FROM THE OIL PALM.
FACTORS INFLUENCING THE RATE OF EXTRACTION

CHAPTER THREE
EXPERIMENTAL PROCEDURE
LEACHING OF SAMPLE
DETERMINATION OF ALKALI (TAKEN AS KOH) QUANTITY
EXPERIMENTAL PROCEDURE 
ANALYSIS OF NGU EXTRACT 

CHAPTER FOUR
EXPERIMENTAL RESULT

CHAPTER FIVE
DISCUSSION

CHAPTER SIX

TEMPERATURE AND WATER REQUIREMENT FOR LEACHING OF CAUSTIC ALKALT FROM ‘NGU’
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Chemical Engineering
  • Project ID: CNG0449
  • Access Fee: ₦5,000 ($14)
  • Pages: 43 Pages
  • Format: Microsoft Word
  • Views: 520
Payment Instruction
Bank payment for Nigerians, Make a payment of ₦ 5,000 to

Bank GTBANK
gtbank
Account Name Obiaks Business Venture
Account Number 0211074565

Bitcoin: Make a payment of 0.0005 to

Bitcoin(Btc)

btc wallet
Copy to clipboard Copy text

500
Leave a comment...

    Details

    Type Project
    Department Chemical Engineering
    Project ID CNG0449
    Fee ₦5,000 ($14)
    No of Pages 43 Pages
    Format Microsoft Word

    Related Works

    TEMPERATURE AND WATER REQUIREMENT FOR LEACHING OF CAUSTIC ALKALT FROM ‘NGU’ ABSTRACT The production and analysis of “Ngu” extract for temperature and water requirement for leaching of casuistic alkali is the basic objective of this project. The production was carried out by using unit operations and also using the female inflorescence of a... Continue Reading
    ABSTRACT  The production and analysis of “Ngu” extract for temperature and water requirement for leaching of caustic alkali is the basic objective of this project.  The production was carried out by using unit operations and also using the female inflorescence of a palm fruit (Eleasis Guineesis) as raw material. The female inflorescence of... Continue Reading
    ABSTRACT  The production and analysis of “Ngu†extract for temperature and water requirement for leaching of casuistic alkali is the basic objective of this project.  The production was carried out by using unit operations and also using the female inflorescence of a palm fruit (Eleasis Guineesis) as raw material.   The female... Continue Reading
    ABSTRACT The production and analysis of “Ngu” extract for temperature and water requirement for leaching of casuistic alkali is the basic objective of this project. The production was carried out by using unit operations and also using the female inflorescence of a palm fruit (Eleasis Guineesis) as raw material. The female... Continue Reading
    Room temperature tribocorrosion behaviour of Al-4.5%Cu/SiC particulate composite was evaluated against stainless steel ball in natural sea water. Ab-initio, the Al-4.5%Cu was reinforced with 5,10,15 and 20 % SiC reinforcements to produce the Al-4.5%Cu/SiC particulate composite by stir casting method. The tribocorrosion test was carried out with an... Continue Reading
    Room  temperature  tribocorrosion behaviour  of  Al-4.5%Cu/SiC particulate composite  was  evaluated against  stainless  steel  ball  in natural  sea  water.  Ab-initio,  the          Al-4.5%Cu  was  reinforced  with  5,10,15  and  20  %  SiC  reinforcements  to  produce  the Al-4.5%Cu/SiC  particulate  composite... Continue Reading
    ABSTRACT A mega filling station can be described from its name –MEGA; which means larger in size. This implies that mega filling station is a large-scale fuel station outlets where fuels of various forms are sold. A typical example is the NNPC MEGA FILLING STATION in... Continue Reading
    ABSTRACT The project is focused on feasibility studies: a requirement for starting a new cooperative business in Nigeria. The importance of a well prepared feasibility study in the cause cooperative information and investment drive cannot be over emphasized. A well prepared feasibility study can be used to obtained loan from banks and thus attract... Continue Reading
    DEPARTMENT: ESTATE MANAGEMENT AND VALUATION CHAPTER ONE 1.0     INTRODUCTION Landed property constitutes often major portions of company assets acceptable as collateral securities for corporate lending. According to Babawale et al (2013), real... Continue Reading
    ABSTRACTS This project was aimed at producing a fine high quality toilet soap at a low cost which will be of used to home and commercial purposes. The toilet soap produced has its major components caustic potash, palm kernel oil (pKo) caustic soda and soda ash. Other additives are perfume, coaming agent, sodium tripotiphosphate (STPP), colour,... Continue Reading
    Call Us
    whatsappWhatsApp Us