Explore Project Topics on: production of door handle using lost wax process

ABSTRACT As the demand for petroleum resources increases, drilling of oil and gas wells are often carried out in challenging and hostile environments. Among the top ten drilling challenges facing the oil and gas industry today is the problem of lost circulation. Major progress has been made to understand this problem and how to combat it. However,... Continue Reading

ABSTRACT The tremendous (large) demand of some petroleum fractions in our modern world today has drive some professionals (experts) in oil sectors into exploration and drilling operation which is aimed at locating the mineral oil deposit and extracting it from beneath the earth surface with aid of some... Continue Reading

ABSTRACT Exchange of digitally signed certificates is often used to establish mutual trust between strangers that wish to share resources or to conduct business transactions. Automated Trust Negotiation (ATN) is an approach to regulate the flow of sensitive information during such an exchange. Previous work on ATN is based on access control... Continue Reading

ABSTRACT Exchange of digitally signed certificates is often used to establish mutual trust between strangers that wish to share resources or to conduct business transactions. Automated Trust Negotiation (ATN) is an approach to regulate the flow of sensitive information during such an exchange. Previous work on ATN is based on access control... Continue Reading

ABSTRACT This projects is aimed at knowing the process and quality factor in Laundary and Toilet Soap Projection. Various factors affected the quality of the soap produced. These include the method used in production, types and nature of oils used, the percentage of the additives... Continue Reading

CHAPTER ONE: 1.0 INTRODUCTION 1.1 Background of the study 1.2 Statement of the problem 1.3 Statement of the objectives 1.4 Research questions 1.5 Research hypotheses 1.6 Significance of the study 1.7 Scope of the study 1.8 Limitations of the study 1.9 Definition of terms CHAPTER TWO: 2.0 REVIEW OF RELATED LITERATURE 2.1 Concept of internal control... Continue Reading

ABSTRACT This research work aims at critically evaluating the process of production and the extent to which the installed capacity of Nigeria Breweries utilized. The study traced the historical development of the company, its range of production and the extent which its capacity is utilized. In collecting data for the research, two sources of data... Continue Reading

ABSTRACT This research work aims at critically evaluating the process of production and the extent to which the installed capacity of Nigerian breweries is utilized. The study traced the historical development of the company its range of product and the extent which its capacity is utilized. In collecting data for the research, two sources of data... Continue Reading

AN EVALUATION OF PRODUCTION PROCESS AND CAPACITY UTILISATION. (A CASE STUDY OF NIGERIAN BREWERIES ENUGU) ABSTRACT This research work aims at critically evaluating the process of production and the extent to which the installed capacity of Nigerian breweries is utilized. The study traced the historical development of the company its range of... Continue Reading

ABSTRACT  This research work aims at critically evaluating the process of production and the extent to which the installed capacity of Nigeria Breweries utilized.  The study traced the historical development of the company, its range of production and the extent which its capacity is utilized. In collecting data for the research, two sources of... Continue Reading

EVALUATION OF PRODUCTION PROCESS AND CAPACITY UTILIZATION (A CASE STUDY OF NIGERIA BREWERIES, ENUGU) ABSTRACT This research work aims at critically evaluating the process of production and the extent to which the installed capacity of Nigeria Breweries utilized. The study traced the historical development of the company, its range of production... Continue Reading

ABSTRACT This research work aims at critically evaluating the process of production and the extent to which the installed capacity of Nigerian breweries is utilized. The study traced the historical development of the company its range of product and the extent which its capacity is utilized. In collecting data for the research, two sources of data... Continue Reading

ABSTRACT The general approach to any design of a process plant involve an advanced network of chemical engineering process. Absorber is a process plant or equipment that are used in the purification of gas or separation of unwanted gas from the mixture when it comes in contact with the liquid. In this models mass transfer reaction and equilibrium... Continue Reading

ABSTRACT The research work is basically concerned with the international procurement and its justification. The research work covers the purchasing activities of Global Soap and Detergent Industry limited Ilorin. International buying is the procurement activities which involved source and obtaining needs or requirement from a foreign country for... Continue Reading

ABSTRACT The general approach to any design of a process plant involve an advanced network of chemical engineering process. Absorber is a process plant or equipment that are used in the purification of gas or separation of unwanted gas from the mixture when it comes in contact with the liquid. In this models mass transfer reaction and equilibrium... Continue Reading

ABSTRACT           This research relates to a candle composition containing non-hydrogenated oil and at least one of long chain hydrocarbon and long-chain hydrocarbon derivatives. A candle composition having non-hydrogenated oil and a solidifying amount of congealing reagent.... Continue Reading

ABSTRACT This research relates to a candle composition containing non-hydrogenated oil and at least one of long chain hydrocarbon and long-chain hydrocarbon derivatives. A candle composition having non-hydrogenated oil and a solidifying amount of congealing reagent. A candle... Continue Reading

ABSTRACT This project report describes the design and construction of an electronic door lock which uses a microcontroller as the main control unit. The project’s objective was to interface this microcontroller with an LCD, keypad and a DC motor. However, programming the PIC chip to perform a task like identifying an authorised user is also... Continue Reading

ABSTRACT This project report describes the design and construction of an electronic door lock which uses a microcontroller as the main control unit. The project’s objective was to interface this microcontroller with an LCD, keypad and a DC motor. However, programming the PIC chip to perform a task like identifying an authorised user is also... Continue Reading

TABLE OF CONTENTS CHAPTER ONE 1.0 Introduction 1.1 Definition of a panel door 1.2 Classification of a door 1.3 Objectives of the project 1.4 Significance of the project CHAPTER TWO 2.0 Timber 2.1 Definition of timber 2.2 Growth of timber 2.3 Types of timber 2.4 Conversion of timber 2.5 Methods of conversion... Continue Reading

ABSTRACT  Security is one thing human should not joke with, especially in today’s world where crime is at a higher rate. One of the ways of providing security is the introduction of security doors in houses, companies, offices and warehouses. Security doors may prevent or control entry or exit, or they may be merely decorative. Larger doors can... Continue Reading

 INTRODUCTION: The main objective of this project is to develop an Automatic  Door opening system using IR sensors which will reduce the need of manual labor. plays a very important role in domestic applications. The elimination of manual supervision adds up as an additional advantage for its ... Continue Reading

ABSTRACT The transmission of infection via fomites constitutes a major threat to public health especially in the developing countries. This study was carried out to investigate the microbial carriage and antibiotics pattern of bacteria on the door handles of campus shuttle operating in the Federal University of Technology Akure. Samples were... Continue Reading

ABSTRACT Whenever we think of redefined security, we think of coded electrical door lock. It is a microcontroller based security door lock that can be used in homes, offices, laboratories, etc. for more reliable and high fidelity door control system, powered by electrons panel or electromechanical panels. Due to high rate of insecurity, especially... Continue Reading

Abstract This paper presents an innovative access control system, based on human detection and path analysis, to reduce false automatic door system actions while increasing the added values for security applications. The proposed system will first ask the visitor for a password... Continue Reading

ABSTRACT This project shows the construction of a microcontroller based security door using smart card. It is aimed towards programming the microcontroller to control the hardware in sliding door. The system consists of a microcontroller 89S52 which sends a signal to the multiplexers on insertion of the smart card in the card slot. The... Continue Reading

This work is on design and Construction of Automated door security system with GSM notification. Is an electrical Electronics Engineering Project.... Continue Reading

ABSTRACT Among various efforts pursued to produce fuel efficient vehicles, light weight engineering (i.e. the use of low-density structurally-efficient materials, the application of advanced manufacturing and joining technologies and the design of highly-integrated, multi-functional components/sub-assemblies) plays a prominent role. In the present... Continue Reading

ABSTRACT Whenever we think of redefined security, we think of coded electrical door lock. It is a microcontroller based security door lock that can be used in homes, offices, laboratories, etc. for more reliable and high fidelity door control system, powered by electrons panel or electromechanical panels. Due to high rate of insecurity, especially... Continue Reading

ABSTRACT This project shows the construction of a microcontroller based security door using smart card. It is aimed towards programming the microcontroller to control the hardware in sliding door. The system consists of a microcontroller 89S52 which sends a signal to the multiplexers on insertion of the smart card in the card slot. The... Continue Reading