Explore Project Topics on: liquid bleach

ABSTRACT The effect of liquid flow rate, pipe size (diameter) and pipe orientation (inclination) on liquid hold-up was investigated. Liquid flow rate between 500 STB/day and 5000 STB/day was studied. An oil of 25˚API at an average temperature of 175˚F, a gas gravity of 0.65, water cut of 25% with water gravity of 1.07 and containing no free gas... Continue Reading

Abstract The study examines the influence of hypo television advertising on students’ choice of bleach (A case study of University of Uyo students). The audiovisual nature of television placed it at edge in terms of effective advertising message delivery when compared with other media. People cultivate and get influenced by what they watch on... Continue Reading

comparative study of disinfectant efficiency of ethanol, bleach,phenolic is my project topic from covenant polytechnic aba, abia state.... Continue Reading

comparative study of disinfectant efficiency of ethanol, bleach,phenolic is my project topic from covenant polytechnic aba, abia state.... Continue Reading

ABSTRACT Ethanol, Bleach and Phenolics are three kinds of disinfectants which have been widely used in common laboratories.  In this study, a compared experiment on these three disinfectants efficiency was conducted against Staphylococcus aureus and Pseudomonas aeruginosa using agar hole diffusion method.  Different concentrations of bleach (1%,... Continue Reading

ABSTRACT Ethanol, Bleach and Phenolics are three kinds of disinfectants which have been widely used in common laboratories. In this study, a compared experiment on these three disinfectants efficiency was conducted against Staphylococcus aureus and Pseudomonas aeruginosa using agar hole diffusion method. Different concentrations of bleach (1%, 2%,... Continue Reading

ABSTRACT Ethanol, Bleach and Phenolics are three kinds of disinfectants which have been widely used in common laboratories.  In this study, a compared experiment on these three disinfectants efficiency was conducted against  Staphylococcus aureus and Pseudomonas aeruginosa  using agar hole diffusion method. Different concentrations of bleach... Continue Reading

Abstract A study was carried out on substrate pasteurisation for P. ostreatus cultivation. The major aim of this work was to compare the effectiveness of wood ash, hydrated lime, bleach and boiling for pasteurisation of the substrate for cultivation of white oyster mushroom, Pleurotus ostreatus, on maize straw. To achieve this objective, weed... Continue Reading

ABSTRACT This research project was carried out principally for the production of liquid and vapourized perfumes from local raw materials.  The local raw material were subjected to various processing conditions in order to obtain purified perfume.  The methods generally used in this work include expression steam distillation and solvent... Continue Reading

DESCRIPTION The Liquid soap business plan is a comprehensive business plan that will assist you with all the needed ideas and plans to start a successful Liquid soap production business. The Liquid soap business plan shows you liquid soap making procedure and ingredients and in raising capital for your liquid soap business. liquid soap making... Continue Reading

ABSTRACT Lemon grass (Cymbogon citratus) is an abundant, locally available plant. In this work, essential oil was extracted from it using solvent extraction method.  In this work two methods of extraction was used, solvent extraction and enfleurage methods were used to extract essential oil from lemongrass. Solvent extraction method yielded 2.08%... Continue Reading

ABSTRACT  The aim of this research work is special formulation of liquid detergent for car wash. In manufacturing liquid detergents, selection of raw materials is been considered as the first step. These raw materials were selected on the basis of several factor such as human and environmental safety, cost compatibility with other ingredients and... Continue Reading

ABSTRACT A project was carried out to produce high quality liquid air refreshner for domestic uses. The project was carried out using the following apparatus. Beakers (250ML), one conical flask, hydrometer, thermometer, two – 5ml of measuring cylinders, one reactor (plastic reactor), stirrer, weighing balance. The chemicals used in the... Continue Reading

ABSTRACT A project was carried out to produce high quality liquid air refreshner for domestic uses. The project was carried out using the following apparatus. Beakers (250ML), one conical flask, hydrometer, thermometer, two – 5ml of measuring cylinders, one reactor (plastic reactor), stirrer,... Continue Reading

ABSTRACT Every Natural gas well ceases producing as reservoir pressure depletes. The usual liquid presence in the reservoir can cause further problems by accumulating in the wellbore and reducing production even more. There are a number of options in well completion to prevent liquid loading even before it becomes a problem. Tubing size and... Continue Reading

ABSTRACT The objective of the work is the catalytic conversion of waste plastics into fuel oil and solid wax using Ca(OH)2 and the design of pyrolysis reactor. Plastic wastes such as, polypropylene, low density polyethylene, high density polyethylene, polystyrene are the most frequently used in everyday activities and disposed of to the... Continue Reading

ABSTRACT The objective of the work is the catalytic conversion of waste plastics into fuel oil and solid wax using Ca(OH)2 and the design of pyrolysis reactor. Plastic wastes such as, polypropylene, low density polyethylene, high density polyethylene, polystyrene are the most frequently used in everyday activities and disposed of to the... Continue Reading

AbSTRACT This research work is based on the construction of control chart for quality characteristics of Coke liquid (Sodium content, Sugar content and Volume) which may be used for control of future products of the Coca-Cola Company. Secondary data collected from Coca- Cola Company, Idokpa, Benin City Plant was analysed using Control Chart for... Continue Reading

AbSTRACT This research work is based on the construction of control chart for quality characteristics of Coke liquid (Sodium content, Sugar content and Volume) which may be used for control of future products of the Coca-Cola Company. Secondary data collected from Coca- Cola Company, Idokpa, Benin City Plant was analysed using Control Chart for... Continue Reading

ABSTRACT This work investigates and evaluates local liquid dielectric for insulation of power transformers. Considering the importance of transformer insulation the investigation is borne out of the need to develop the capacity for local production of transformer dielectric. Natural esters of vegetables origin have been found to have the suitable... Continue Reading

ABSTRACT The physical properties of CNSL extracted by pyrolysis was studied using standard procedures. The physical properties of the CNSL studied and results obtained compared with other extraction methods (hexane extracted and decarboxylated) from literature are moisture content 4.1%, (6.40%, 3.2%), specific gravity 0.943 (0.926, 0.926)... Continue Reading

. ABSTRACT The global scenario is now supporting the development of malaria drug from less toxic plant products with proven medicinal properties. Each part of the neem plant (Azadirachtaindica A. Juss) reportedly has various medicinal properties and has... Continue Reading

ABSTRACT The purpose of the project is to study the effect of liquid flow rate and gas flow rate on the pressure drop in a packed absorption tower and also to repair and restore the packed absorption tower to good working condition. Trouble shooting revealed that the exit drain value was broken due to carelessness on the part of former user of the... Continue Reading

ABSTRACT The purpose of the project is to study the effect of liquid flow rate and gas flow rate on the pressure drop in a packed absorption tower and also to repair and restore the packed absorption tower to good working condition. Trouble shooting... Continue Reading

ABSTRACT The purpose of the project is to study the effect of liquid flow rate and gas flow rate on the pressure drop in a packed absorption tower and also to repair and restore the packed absorption tower to good working condition. Trouble shooting revealed that the exit drain value was broken due to carelessness on the part of former user of the... Continue Reading

ABSTRACT: This study was carried out in Udi, Udenu and Nsukka Local Government Areas, in Enugu state. The effects of liquid wastes from automobile workshops on some selected soil properties of the study area were investigated. Auger samples were collected at two depths, (surface, 0- 20cm) and (subsurface, 20- 40cm) of automobile wastes... Continue Reading

Abstract Two different set of soil samples were collected near Kaduna Refining and Petrochemical Company Limited (KRPC), a Subsidiary of Nigerian National Petroleum Corporation (NNPC) Kaduna. The first set of samples labelled (D) was obtained from areas where diesel from the refinery spilled into the environment and the second set of samples... Continue Reading

ABSTRACT: This study was carried out in Udi, Udenu and Nsukka Local Government Areas, in Enugu state. The effects of liquid wastes from automobile workshops on some selected soil properties of the study area were investigated. Auger samples were collected at two depths, (surface, 0- 20cm) and (subsurface, 20- 40cm) of automobile wastes... Continue Reading

TABLE OF CONTENTS CHAPTER ONE 1.0 Introduction 1.1 Background of Study 1.2 Statement of Problem 1.3 Purpose of the Study 1.4 Scope of the Study 1.5 Research Question 1.6 Research Hypothesis 1.7 Significance of the Study 1.8... Continue Reading

ABSTRACT This research work presents the static analysis of short cylindrical shell under internal liquid pressure with various boundary conditions and aspect ratios. Improved fourth order finite difference method was employed for the analysis and a MATLAB computer program was developed based on the matrix equations and models generated from the... Continue Reading