COMPARATIVE ANALYSIS OF COAL, FUEL OIL AND NATURAL GAS FOR CEMENT PRODUCTION

  • Type: Project
  • Department: Chemical Engineering
  • Project ID: CNG0505
  • Access Fee: ₦5,000 ($14)
  • Pages: 56 Pages
  • Format: Microsoft Word
  • Views: 553
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

ABSTRACT
This study is a comparative analysis of the use of coal, fuel oil and natural gas for cement production noting their physical and chemical properties, cost and availability, impact on the environment and human health. Out of the seven cement manufacturing industries in Nigeria, three industries use these fuels were selected for the study. The industries are NigerCem –Ebonyi state, Dangote cement –Benue state and UniCem -Cross river state. Questionnaires were used to gather information on the three fuels. The likert 3- scale model was adopted, using 2.0 as the cut off mark. Based on the analysis of the study, it was observed out that amongst these three (3) fuels, fuel oil is presently expensive though available, while coal and natural gas are cheap but coal is not available due to the closure of Nigeria‟s coal mine. In terms of environment and health, coal and fuel oil emit much harmful gases to the environment and cause more health problems to cement worker but natural gas emits less of these harmful gases to the environment and cause less health problems to workers. The study therefore shows that natural gas is the best fuel because it is cheap, readily available and creates fewer problems to the environment.

TABLE OF CONTENTS
Title page
Certification ---------------------------------------------------------------------------- ii
Approval ------------------------------------------------------------------------------- iii
Dedication ----------------------------------------------------------------------------- iv
Acknowledgement -------------------------------------------------------------------- v
Abstract -------------------------------------------------------------------------------- vi
Table of contents ---------------------------------------------------------------------- vii

CHAPTER ONE
INTRODUCTION
1.1 Background of study ------------------------------------------------------------ 1
1.2 Statement of problem ------------------------------------------------------------ 2
1.3 Aims and objectives ------------------------------------------------------------- 2
1.4 Significance of study ------------------------------------------------------------ 3
1.5 Scope of study -------------------------------------------------------------------- 3

CHAPTER TWO
LITERATURE REVIEW
2.1 Energy source --------------------------------------------------------------------- 5
2.1.0 Coal ------------------------------------------------------------------------------ 5
2.1.1 Fuel oil -------------------------------------------------------------------------- 15
2.1.2 Natural gas --------------------------------------------------------------------- 15
2.2 Cement ---------------------------------------------------------------------------- 17
2.2.0 Cement manufacturing processes -------------------------------------------- 18
2.2.1 Major characteristics of cement industry ---------------------------------- 22
2.2.2 Energy challenge in the industry -------------------------------------------- 23
2.2.3 Demand for cement ------------------------------------------------------------ 25
2.2.4 Emission from cement industry ---------------------------------------------- 26
2.3 Conceptual framework ----------------------------------------------------------- 30

CHAPTER THREE
RESEARCH METHODOLOGY
3.1 Research methods ----------------------------------------------------------------- 31
3.2 Sample procedure/sample size determination --------------------------- ----- 31
3.3 Data collection -------------------------------------------------------------- ------ 33
3.4 Operational measures of the variable ------------------------------------------- 33
3.5 Research analysis ----------------------------------------------------------------- 34

CHAPTER FOUR
PRESENTATION AND ANALYSIS OF DATA
4.1 Data presentation ----------------------------------------------------------------- 35

CHAPTER FIVE
SUMMARY, CONCLUSION AND RECOMMENDATION
5.1 Summary ------------------------------------------------------------------ 50
5.2 Conclusion ---------------------------------------------------------------- 51
5.3 Recommendation -------------------------------------------------------- 51
REFERENCE --------------------------------------------------------------- 53
APPENDIX ------------------------------------------------------------------ 56
COMPARATIVE ANALYSIS OF COAL, FUEL OIL AND NATURAL GAS FOR CEMENT PRODUCTION
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Chemical Engineering
  • Project ID: CNG0505
  • Access Fee: ₦5,000 ($14)
  • Pages: 56 Pages
  • Format: Microsoft Word
  • Views: 553
Payment Instruction
Bank payment for Nigerians, Make a payment of ₦ 5,000 to

Bank GTBANK
gtbank
Account Name Obiaks Business Venture
Account Number 0211074565

Bitcoin: Make a payment of 0.0005 to

Bitcoin(Btc)

btc wallet
Copy to clipboard Copy text

500
Leave a comment...

    Details

    Type Project
    Department Chemical Engineering
    Project ID CNG0505
    Fee ₦5,000 ($14)
    No of Pages 56 Pages
    Format Microsoft Word

    Related Works

    ABSTRACT This study is a comparative analysis of the use of coal, fuel oil and natural gas for cement production noting their physical and chemical properties, cost and availability, impact on the environment and human health. Out of the seven cement manufacturing industries in Nigeria, three industries use these fuels were selected for the study.... Continue Reading
    ABSTRACT This study is a comparative analysis of the use of coal, fuel oil and natural gas for cement production noting their physical and chemical properties, cost and availability, impact on the environment and human health. Out of the seven cement manufacturing industries in Nigeria, three industries use these fuels were selected for the study.... Continue Reading
    ABSTRACT This study is a comparative analysis of the use of coal, fuel oil and natural gas for cement production noting their physical and chemical properties, cost and availability, impact on the environment and human health. Out of the seven cement manufacturing industries in Nigeria, three industries use these fuels were selected for the study.... Continue Reading
    ABSTRACT Development and performance analysis of compressed natural gas (CNG) as a transportation fuel for automobiles in Nigeria are presented. The study involved compositional analysis of natural gas obtained from the product sales point at a treatment plant about 10km off the Port Harcourt-Onitsha route chosen to ensure standard sales gas... Continue Reading
    ABSTRCT The experiment was carried out to analyze comparatively coal and coconut activated carbon.  The coal sample used in bituminous and with density of 1300kg 1m3 tile coconut shell was used. The coal and coconut shell was first activated using phosphoric acid.  The activated coal and coconut carbons mere then used to bleach palm oil after... Continue Reading
    ABSTRCT The experiment was carried out to analyze comparatively coal and coconut activated carbon. The coal sample used in bituminous and with density of 1300kg 1m3 tile coconut shell was used. The coal and coconut shell was first activated using phosphoric acid. The activated coal and... Continue Reading
    ABSTRCT The experiment was carried out to analyze comparatively coal and coconut activated carbon. The coal sample used in bituminous and with density of 1300kg 1m3 tile coconut shell was used. The coal and coconut shell was first activated using phosphoric acid. The activated coal and coconut carbons mere then used to bleach palm oil after... Continue Reading
    CHARACTERIZATION OF MAIGANGA AND OKABA COAL BLEND FOR SOLID FUEL COMBUSTION         Department: Engineering – Chemical Engineering   CHAPTER ONE 1.0 BACK GROUND OF STUDY 1.1 INTRODUCTION Power generation in any country is very essential to its economic growth, Nigeria generates about 4,000 megawatts(MW) of electricity (Ediri, 2014), but... Continue Reading
    ABSTRACT The improvement of the combustion properties of coal and biomass by blending and carbonization was investigated. Proximate and ultimate analysis of coal, sawdust, corn cob and their blends were carried out using ASTM methods. The proximate and ultimate analyses were repeated on the five blends after carbonization at 500o C for one hour.... Continue Reading
    ABSTRACT Broiler production is carried out under different production systems and different production systems imply variations in cost of inputs and returns. This study looked at the cost implications of raising broilers under different production systems as well as constraints faced by the farmers. The study was conducted in Edo State of... Continue Reading
    Call Us
    whatsappWhatsApp Us