INVESTIGATING TURBULENT CONVECTION IN A RECTANGULAR ENCLOSURE USING SHEAR STRESS TRANSPORT K-ω MODEL

  • Type: Project
  • Department: Mathematics
  • Project ID: MTH0079
  • Access Fee: ₦5,000 ($14)
  • Pages: 78 Pages
  • Format: Microsoft Word
  • Views: 834
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Studies have been done on the aspect ratio effect on natural convection turbulence using standard k-ε model but further studies showed that k-ω SST model performed better than both k-ε and k-ω model in the whole enclosure. Thus, there was need to do a numerical study on the natural convection fluid flow in a rectangular enclosure full of air using SST k-ω model. The left vertical wall of the enclosure was maintained at a steady high temperature Th of 323K while the right wall at a steady cool temperature Tc of 303K with the remaining walls adiabatic. Time-averaged energy, momentum and continuity equations with the two equation SST k-omega turbulence model were used to generate isotherms, streamlines and velocity magnitudes for different aspect ratios of the enclosure so as to be able to investigate effect of aspect ratio on turbulence. It was shown that as the aspect ratio of increased from 2, 4, 6 and 8 of the enclosure, the velocity of elements decreased and the vortices became smaller and more parallel thus concluded that an increase in aspect ratio decreased the turbulence.

INVESTIGATING TURBULENT CONVECTION IN A RECTANGULAR ENCLOSURE USING SHEAR STRESS TRANSPORT K-ω MODEL
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Mathematics
  • Project ID: MTH0079
  • Access Fee: ₦5,000 ($14)
  • Pages: 78 Pages
  • Format: Microsoft Word
  • Views: 834
Payment Instruction
Bank payment for Nigerians, Make a payment of ₦ 5,000 to

Bank GTBANK
gtbank
Account Name Obiaks Business Venture
Account Number 0211074565

Bitcoin: Make a payment of 0.0005 to

Bitcoin(Btc)

btc wallet
Copy to clipboard Copy text

500
Leave a comment...

    Details

    Type Project
    Department Mathematics
    Project ID MTH0079
    Fee ₦5,000 ($14)
    No of Pages 78 Pages
    Format Microsoft Word

    Related Works

    Studies have been done on the aspect ratio effect on natural convection turbulence using standard  k-ε model but further studies showed that k-ω SST model performed better than both k-ε and k-ω  model in the whole enclosure. Thus, there was need to do a numerical study on the natural  convection fluid flow in a rectangular enclosure full of... Continue Reading
    ABSTRACT Turbulent flow is a type of fluid flow in which the fluid undergoes irregular fluctuations. The velocity of the fluid at a point is continuously undergoing changes in both magnitude and direction. Turbulent natural convection has been studied both numerically and theoretically. It plays an important role in the field of heat transfer and... Continue Reading
    This experiment was conducted in order to have a broader knowledge on hydraulic jump and its  applications. It was performed in the hydraulic laboratory of the department of Water Resources  and Environmental Engineering, Ahmadu Bello University, Zaria, using the TQH23, 2.52m flow  rectangular channel and the HID hydraulic bench which provides... Continue Reading
    This experiment was conducted in order to have a broader knowledge on hydraulic jump and its applications. It was performed in the hydraulic laboratory of the department of Water Resources and Environmental Engineering, Ahmadu Bello University, Zaria, using the TQH23, 2.52m flow rectangular channel and the HID hydraulic bench which provides water... Continue Reading
    ABSTRACT INVESTIGATING THE CONFORMITY BETWEEN THE ZIMBABWE LAND ADMINISTRATION SYSTEMAND THE LAND ADMINISTRATION DOMAIN MODEL Page 5 The increase in land utilization has necessitated the devising of more adequate technologies for better management and administration of the nation‟s most valuable resource. The land administration functions in... Continue Reading
    ABSTRACT Heat transfer plays a great role in engineering processes, blowing of fluids is used in designing thrusters and prevention of corrosion. Suction is used in film cooling and coating of wires in chemical engineering. A lot of research has based on thermal reduction in processing streams and forgetting the machine efficiency. The study... Continue Reading
    Abstract Industrial accidents are on the rise. This fact is even more prevalent in developing countries where the countries lack the safety standards required to ensure workplace safety in the pursuit of economic development. As land in prime locations becomes increasingly scarce, there is an argument for building skyscrapers. But this just... Continue Reading
    CFD investigation of mesh, boundary condition and location, and the effect of turbulence models on the turbulent separated flow over a forward-backward-facing step. A numerical model was set up to replicate and compare with the model in the literature. The Reynolds number, Re, is 1.7E 5  based on step height 50 mm and obstacle length L = 10H. The... Continue Reading
    ABSTRACT During this research work, namely; the undrained shear behavior of soils within Nnamdi Azikiwe University, five different samples within the university compound were analyzed. Some laboratory test was carried out for classification and identification of their engineering properties, these tests include particle size distribution,... Continue Reading
    ABSTRACT During this research work, namely; the undrained shear behavior of soils within Nnamdi Azikiwe University, five different samples within the university compound were analyzed. Some laboratory test was carried out for classification and identification of their engineering properties, these tests include particle size distribution,... Continue Reading
    Call Us
    whatsappWhatsApp Us